User manual HAIER DTA-2189PF

[. . . ] CV2018J TV / DVD Combination USER MANUAL Please read this manual carefully before using this TV set and keep it for future reference. PRECAUTIONS FCC WARNING-This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. CAUTION:USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION:INSIDE, NEAR THE DECK MECHANISM. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CONTENTS Before Operation Warning and cautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 Antenna Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note: Select CC1 for full translation of the primary language such as English in your area. Select CC2 for secondary language translation such as French or any other language that may be broadcast in your area. Demo Mode: This will display the main functions of the TV set. Menu Functions (Continued) Channel setup: By pressing MENU button , and then pressing VOL-/+ button it will bring you to Channel Setup menu. You will see the following display on TV screen. Channel Channel System Air Cable Skip Current Ch. Fine Auto Program Auto Air off 2 Follow the procedure below to select above options: 1. Press the CH(+) and CH(-) button to go up and down the menu. 2. Press VOL (+) button or VOL (-) button to select your preference. Channel System: Press the VOL(-/+) buttons to select the correct channel system. In general, you can set it as "AUTO" AUTO, NTSC and NTSC443 will display in turn Air Cable: Press VOL (+) button or VOL(-) button to select Aerial Antenna (VHF and UHF) or Cable Antenna (CATV) reception preference. Skip : Press VOL(+) button or VOL(-) button to add or delete a channel from the stored memory. : Press VOL(+) button to go up and VOL (-) button to go down to set the channel position. The display will show the current playing channel. Channel Coverage by Antenna: Antenna Type Channel Range VHF 2-13 UHF 14-69 CATV 1-125 Fine: If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor. Press VOL (+/-) to start the Fine Tune function. Auto Program: Press VOL (+) button to auto program channels. This search automatically adds only the active channels in your area to the TV's memory. It deletes any channels on which there is no broadcast or a poor signal. Note: The Auto Search function will scan the channels on the selected antenna input. If the TV is connected to cable, please select Cable under ' Air Cable ' sub menu. Menu Functions (Continued) Calendar: Your TV has been designed with a calendar. By pressing MENU button , and then pressing VOL(-/+) buttons it will bring you to Calendar. You will see the following display on TV screen. OCT OCT OCT Calendar 2005 9 14 Follow the procedure below to adjust the Calendar date: 1. Press the CH(+/-) buttons to select the year item, the month item or the date item. [. . . ] You must confirm the 4 digits before the new password can be accepted. . . Preference Page. . Parental Password Default Change PLAY/ENTER Old Password New Password Confirm PWD NOTE:If you forget your password or a password is accidentally set enter 2881 as the password. This will enable you to regain control. DVD System Setup(Continued) DVD System Setup SETUP DEFAULT: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. . . Preference Page. . [. . . ]