User manual HAIER DW12-EFMSS

[. . . ] - Do not lean or sit on the door when it is open, as this could overturn the dishwasher. - If the appliance malfunctions, turn off water supply to the appliance and disconnect the plug from the wall socket. Then, refer to the "Troubleshooting section on page 9. " If you cannot resolve the problem, contact an authorised service agent. - Only specialised personnel are authorised to make repairs. [. . . ] They will also dry better. Lower Rack Upper Rack socket. - Make sure that the water supply is turned on to full pressure. - Load the dishwasher (see the section entitled, "Loading the Dishwasher" on page 5). - Pour in the detergent (see the section entitled, "Salt, Detergent and Rinse Aid" on page 3 and 4). - Turn the knob located on the right of the control panel in clockwise direction until the number or symbol for the cycle setting is aligned with the reference mark (see the section entitled, "Wash Cycle Table" on page 8). How to use the lower rack We recommend that you place the most difficult to clean items on the bottom rack: pots, pans, lids, serving dishes and bowls, as shown in the figure to the right. It is preferable to place serving dishes and lids on the sides of the racks in order to avoid blocking the rotation of the top spray arm. - Deep pots should be slanted to allow the water to flow out. - The lower rack features fold down tine rows (see fig. A) so that larger or more pots and pans can be loaded. - The silverware basket can be doubled (see fig. B) so that only one section may be used when the silverware load is light. This also makes space for additional pots and pans and it can also be placed in the upper rack. - Silverware should be placed in the silverware basket with the handles at the bottom; if the rack has side baskets, the spoons should be located individually into the appropriate slots. Especially long utensils should be placed in the horizontal position at the front of the upper rack. Load for 12 Standard Settings - Press the ON-OFF button, and the ON-OFF light will turn on. At A cycle that is underway can only be modified if it has been this point, the wash cycle will begin. Otherwise, the detergent may have alIf you forget to load some of the dishes ready been used, and the appliance may have already drained The wash cycle can be interrupted by pressing the ON-OFF button. If this is the case, the detergent dispenser must You can then load additional dishes and turn the appliance back be refilled (see the paragraph entitled, "Loading the Detergent" on. The cycle will start where it left off. Cancelling or modifying a wash cycle setting At the end of the wash cycle When the knob stops turning and is aligned with a STOP mark (see figure), the cycle has finished. Turn off the appliance using the ON-OFF button, turn off the water supply and open the door of the dishwasher. on page 4). Press the ON-OFF button, and the ON light will turn off. Rotate the knob in clockwise direction to the desired cycle setting (see the section entitled: Starting a wash cycle ?F. Then, turn the dishwasher back on using the ON-OFF button. fig. A fig. B How to use the upper rack The upper rack is designed to hold more delicate and lighter dishware, such as glasses, cups and saucers, plates, small bowls and shallow pans (as long as they are not too dirty). - Position the dishes and cookware so that they do not get moved by the spray of water. The upper rack can be adjusted for height by using the knobs located on both sides of the rack itself (see fig. C). [. . . ] If the appliance is level, it will help ensure proper performance. Cold Water Connection Connect the cold water supply hose to a threaded 3/4 (gas) connector and make sure that it is fastened tightly in place (see fig. 1). A B If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance. fig. 1 Troubleshooting The Dishes Are Not Clean It may occur that the dishwasher does not function properly or at all. Before calling for assistance, Let us see what can be done first: Have you forgotten to press one of the buttons or to perform an essential operation? [. . . ]