Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HAIER DW60BI. We hope that this HAIER DW60BI user guide will be useful to you.
Lastmanuals help download the user guide HAIER DW60BI.
Detailed instructions for use are in the User's Guide.
[. . . ] - Do not lean or sit on the door when it is open , as this could overturn the dishwasher. - If the appliance malfunctions, turn off water supply to the appliance and disconnect the plug from the wall socket. Then, consult the section entitled, "Troubleshooting". If you cannot solve the problem, contact a service center. [. . . ] The upper rack can be adjusted for height by using the knobs located on the sides of the rack itself (see fig. B).
3 4
Fig. A
Fig. B
. 5.
Starting the Appliance
Starting a wash cycle
After having completed all of the installation steps in the preceding paragraphs, turn on the water to the unit, partially open the door of the dishwasher, and press the ON-OFF button "A" located on the control panel. The "B" indicator light will come on. At this point, the appliance is on and ready to be programmed.
GB
If you forget to load some of the dishes. . .
The wash cycle can be interrupted by opening the door carefully (in order to avoid being sprayed by hot water). Acoustic sound will be heard and all cycle indicator lights will flash. When the door is closed again, the cycle will automatically restart at the point where it left off.
Setting and Starting a wash Cycle
Choose the desired cycle by pressing the cycle selection button "C". Each time it is pressed, one of the cycle indicator lights "D" will come on in succession. Choose the wash cycle you feel is most appropriate for the type of dishes that need washing (consult the wash cycle table contained in this manual, especially when first using the appliance). Close the door and the indicator light "D" will begin to blink indicating that the wash cycle has begun and cannot be modified. If necessary, read the paragraph entitled, "Cancelling or modifying a cycle while underway". The end of the cycle will be signalled by six acoustic sound, and the indicator light "D" will turn off.
At the end of the wash cycle. . .
The end of the cycle will be indicated by six acoustic signal, at the same time the "D" indicator light will turn off. Open the door, turn off the appliance using the ON-OFF switch and turn off the water supply to the unit. Wait a few minutes before removing the dishes so as to avoid handling them while still hot (when they are more susceptible to breakage) and to get better drying results.
Cancelling or modifying a cycle while underway. . .
Premise: A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may have already been used, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the paragraph entitled, "Loading the Detergent").
To change the cycle currently underway, open the door, press the ON-OFF button "A" to turn the machine off and then open the door. To set a new wash cycle, follow the instructions contained in the paragraph entitled, "Starting a Wash Cycle".
. 6.
Wash Cycle Table
GB
Cycle
Cycle Selection Information
Description of Cycle
Detergent
Rinse Aid
Very dirty dishes, pots and pans. (Not to be used with delicate items)
Pre-wash with hot water. Extended wash at 70 Rinse with cold water. K
30g
Heavy Duty
Normally dirty dishes, pots and pans. Extended wash at 50 Rinse with hot water. .
30g
ERF
Normal Wash (EN50242)
dard daily cycle.
Pre-wash with cold water. Normally dirty dishes, pots and pans without dried on residue. Extended wash at 50 Rinse with cold water. [. . . ] The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water. Important The wires in the mains lead on this appliance are coloured in accordance with the following code: Green and Yellow - Earth Blue Neutral Brown Live As the colours may not correspond with the markings identifying the terminals in your plug proceed as follows. The green and yellow wire must be connected to the terminal in the plug which is marked with the letter E or with the earth symbol or coloured green and yellow. The blue wire must be connected to the terminal marked N or coloured black. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HAIER DW60BI
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HAIER DW60BI will begin.