User manual HAIER DW9-CBE

[. . . ] The dishwasher must not be connected to the electricity supply while installation is being carried out. Ensure that the domestic wiring is properly earthed. The mains electricity supply must conform to the details shown on the dishwasher rating plate. Do not connect the dishwasher to the electricity supply using an extension cable. [. . . ] Items with decorative patterns printed or painted onto the surface of crockery, glasses, etc. Aluminium and silver items tend to become discoloured or faded if washed in the dishwasher. Some types of glass can become opaque in appearance after they have been washed many times in a dishwasher. Highly absorbent materials, such as sponges and towels, should never be placed in the dishwasher. Our recommendation In the future, only purchase table or kitchenware that is dishwasher-proof. Important Items that have been soiled by tobacco ash, wax, lubricating grease or paint, should not be put in the dishwasher. Damage to glassware and other dishes Possible causes Type of glass or manufacturing process. Water temperature and duration of dishwasher programme. Suggested remedy Use glassware or porcelain dishes that have been marked `dishwasher-proof' by the manufacturer. Use a mild detergent that is described as `kind to dishes'. If necessary, seek further information from detergent manufacturers. Select a programme with a low temperature and as short a duration as possible. To prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the programme has ended. 10 Arranging crockery, glasses, etc. in the dishwasher en Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before being washed. Immediately press the Delayed Start button "F". The delayed start indicator "E" blinks and the time remaining indicator "G" changes to " ". Press the Delayed Start button for 2 seconds until the numerical display shows the required delay. To cancel the time delay setting, press the Delayed Start button until the delayed start indicator "E" goes out. Rotate programme dial "J" to select the desired programme. A CE H B DF G I J 16 en After 3 seconds the delayed start indicator "E" blinks. The time-remaining indicator "G" will also blink. The programme will start when both lights fade. Cancelling or modifying a cycle A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the detergent may have already been used and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the paragraph entitled, "Adding Detergent"). To modify a cycle that is already underway, follow the instructions contained in the paragraph entitled "Reset function" and select the programme you require (see the paragraph entitled "Switching the dishwasher ON"). A CE H B DF G I 3in1 function When using "3 in 1" combination products, the rinse-aid and salt indicator lights are no longer relevant. It may be helpful to select the lowest possible setting for water hardness. [. . . ] Rotation of spray arm was obstructed by dishes, etc. Nozzles in spray arm are blocked by food residue. Waste-water pump is jammed. 23 en Plastic items are discoloured Not enough detergent was added to dispenser. Detergent has insufficient bleaching properties. [. . . ]