User manual HAIER FCD-8

[. . . ] If the power cord is damaged, be sure to have it replaced by appointed maintenance. In cold area, if the water heater is idle for long period in winter, please pull the safety valve to discharge the water to avoid freezing. The shell of the water heater is all plastic. [. . . ] If the water temperature drops to certain degree, the red indicator will light on again to continue heating. It will circulate like that to guarantee the continuous hot water supply. ¡Â Dear Before Usage users, Thanks for choosing Haier water heater product. Haier products have good quality and excellent performance. To facilitate you to use the product, please read the manual and operate accordingly. The international star service of Haier Group will always accompany you. No matter what kind of problems you meet in usage, please contact with the local after -sales service agent. Thanks again for choosing Haier Product. The water heater you purchased may not fully comply with the figure in the manual due to the improvement of product. We apologize for the inconvenience occurred therefrom. Features 1. Safely: Hai-quality heat proof stainless steel electric heating element, safe and Reliable; overtemperature protection; overpressure protection of tank; 2. Durability: Full plastic shell, elegant and durable; Enamel tank, with more reliable quality and longer operation life. Multi- usage: Enclosed structure, capable of supplying multiple places; Suitable for family , enterprise, catering, beauty service etc. Nice molding, space-saving Arc appearance, appealing design, dapper and elegant. It will stop heating when the temperature Reaches 60 . Attention This product requires power supply with 220V , 50Hz. The max heating temperature is 60 , not drinkable. Earthing wire shall be separated from neutral wire strictly. To avoid accident, the positions of the live wire and earthing wire can not be replaced. (See to Figure 5. ) Earthing wire Earthing wire Earthing wire Live wire (Figure 5) Live wire Neutral wire Live wire Live wire Neutral wire Parameters Earthing wire Rated voltage:220V~50Hz Power: 1200W Rated pressure: 0. 75MPa Waterproof grade: antisplash( ) Dimension(See to Figure 1) Weight: (See to Figure 1) Volume: (See to Figure 1) Tap water pressure: no less than 0. 05MPa 5 2 Dimension Figure £¨ Figure 1£© Installation Be sure to have it installed by the appointed staff. First decide the installation location according to the usage requirement. Make two holes in the wall with depth 70mm and 9mm by churn drill as per the indication of installation diagram. [. . . ] Fasten the drain hose to the drain thread of safety valve by twisting (see to Figure 3). According to the need, you could truncate or elongate the hose in your favor. Connect the other end of drain hose to the sewer to avoid polluting the room by splashing. [. . . ]