Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HAIER GDE 450 AW. We hope that this HAIER GDE 450 AW user guide will be useful to you.
Lastmanuals help download the user guide HAIER GDE 450 AW.
Detailed instructions for use are in the User's Guide.
[. . . ] Actual model may vary per model purchased. Before beginning installation, carefully read these instructions. this will simplify the installation and ensure the dryer is installed correctly and safely. NOTE: The electrical service to the dryer must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANSI/ NFPA 70 or in Canada, CSA C22. [. . . ] Remove the screws securing the terminal block access cover and the strain relief mounting bracket located on the back of the dryer's upper corner. Install a UL approved strain relief into the power cord entry hole of the mounting bracket. Finger tighten the nut only at this time. Power cord, NEMA 10-30 Type SRDT, through the strain relief. Attach the power cord neutral (center wire) conductor to the brass colored center terminal on the terminal block. Reattach the strain relief mounting bracket to the back of the dryer with two screws. Tighten the screws securing the cord restraint firmly against the power cord. Remove the screws securing the terminal block access cover and the strain relief mounting bracket located on the back of the dryer upper corner. Install a UL approved strain relief into the power cord entry hole of the mounting bracket . Finger tighten the nut only at this time. Remove the green neutral ground wire from the green ground screw located above the terminal block. Attach the green power cord ground wire to the cabinet with green ground screw. Attach the white (neutral) power cord conductors and the green ground wire from the dryer harness to the brass-colored center terminal on the terminal block. Tighten the screws securing the cord restraint firmly against the power cord. Semi-rigid or approved pipe from gas supply line to the 3/8 inch (0. With the dryer in its final position, adjust one or more of the legs until the dryer is resting solid on all four legs. Plug the power cord into a grounded outlet. NOTE: check to ensure power is Off at circuit breaker/fuse box before plugging the power cord into the outlet. Turn on the power at the circuit breaker/fuse box. Before operating the dryer, make sure the dryer area is clean and free from combustible materials, gasoline, and other flammable vapors. Run the dryer through a cycle check for proper operation. NOTE: On gas dryers, before the burner will light, it is necessary for the gas line to be bled of air. [. . . ] exceptions: Commercial or Rental Use warranty. 90 days labor from date of original purchase. 90 days parts from date of original purchase NO OTHER WARRANTY APPLIES. For the name and telephone number of the nearest authorized service center please call 1-877-337-3639. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HAIER GDE 450 AW
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HAIER GDE 450 AW will begin.
