User manual HAIER H3F-320WSAAU1

[. . . ] Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance. If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass this manual so that the new owner can become familiar with the appliance and safety warnings. [. . . ] When display is locked, functions such as temperature setting or super freeze are disabled. When above operation is attempted, Child lock indicator will blink for 3 times, to remind that the display is locked. 5 Temperature setting When display is unlocked, by touching different temperature buttons, different temperature could be set, this process will be accompanied by beeps. Freeze and Fridge (4°C)(A) mode has big difference in temperature, and is for different food storage. 6 Freeze mode (-16°C to -24°C) (B - E) When display is unlocked, by touching different freeze temperature buttons, different temperature could be set, indicators on left of the touch button will be light and others will be off. 7 Fridge mode(4°C) (A) When display is unlocked, by touching (4°C) (A) and hold for 3 seconds, indicators "4°C" (a) will be light, the freezer works in fridge mode. After stabilization, temperature is around 4°C. Before putting lots of food inside the freezer, activate super freeze function to have lower temperature, to make sure better freeze result. When display is unlocked, touch and hold (-24°C) (E) for 3 seconds, indicators (b - e) will be light, the freezer works in super freeze mode. to deactivate manually super freeze function , repeat steps above. If not deactivated manually, the function will be deactivated automatically after 50 hours. If you have a large amount of food to freeze at one time, it is recommended that the function is activated 24 hours before inserting food. Function will stop automatically after 50 hours or manually. Power consumption will increase when this function is on. If you do so, super freeze indicator will blink for 3 times to remind that the freezer is in super freeze mode. When temperature is set at -16°C or lower, touch FresherZone button(F), the FresherZone indicator(f) illuminates, then the blast function is activated. When activated, the functions will be automatically deactivated when temperature is reached or after 24 hours. When temperature is set at 4°C, touch FresherZone button (F), the FresherZone indicator(f) illuminates, then the FresherZone function is activated. When activated, the functions will be automatically deactivated when temperature is reached or after 3 hours. repeat the operation to deactivate manually. Deactivate FresherZone before switching from freezer to fridge temperature, or switching from fridge to freezer temperature. When display is unlocked, by touching (-16°C) (B) the appliance is set into Eco mode. [. . . ] Before connecting the appliance to the power supply you should check, whether the door swing must changed from right (as delivered) to left, if this is required by the installation location and the usability. You need two persons to carry out the door reversibility. Before any operation, first unplug the appliance from the mains . Do not tilt the appliance more than 45 ° to prevent damage of the cooling system. [. . . ]