User manual HAIER HF-220WAA

[. . . ] Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance. If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and safety warnings. [. . . ] Check the Controls Panel: Touch any button on the display screen and check whether the temperature area and the selected icon can be lightened. set temperature: To set temperature , push the button A2. During temperature setting two numbers on display show the point set in flashing mode. Additional pressing on this button modify the set-point in cycling and decreasing mode from ­14°C to ­26°C. If no action is done on the OK button within 5 sec, the set point will be stored automatically. After the temperature is set, the two numbers on display come back to the freezer temperature visualization. Press the button A4 for 5 sec to turn off the power of the freezer; do it again the power will be turned on. Before any cleaning operation, make sure to disconnect the appliance from the power supply by pulling out the plug, it isn't enough to turn off the appliance pushing power button. Freezer functions FAST FREEZING: Press the button A3 to choose the "S. FRZ" function, then press the button A4, you can activate fast freezing of fresh food. The dedicate light E switches on to indicate that the function is on, and activation of the function is achieved. Light will be on till function will be disabled. For fast freezing a small amount of food, this function is recommended to be activated 2 hours before inserting food; if you have a large amount of food to freeze at one time, it is recommended that the function be activated 24 hours before inserting food Function will stop automatically after 24 hours or manually. Power consumption will increase when this function is on. FUNCTION ECO: When the screen is unlocked, press the button A3 to choose the "ECO" function, then Press the button A4, you can activate the function of energy saving, setting temperature within the range of -18°C and -14°C. If the temperature has been set at -19°C or lower, it will be set automatically at -18°C when the ECO function is on. Insertion into a row of kitchen units The appliance can be inserted into a row of kitchen units. To match the appliance to the height of the row of the units, a suitable stack cabinet can be added. When inserting the appliance into a row of standard kitchen units (max. Depth 580 mm), the appliance can be installed directly next to the kitchen unit. The appliance door projects relative to the front of the kitchen unit by 34mm at the side and by 55mm in the middle of the appliance. It can be opened and closed perfectly as a result. [. . . ] In this case, it is normal for freezer to run longer. Normally, it takes 8 to 12 hours for freezer to totally cool down. warm air enters the freezer and causes it to start frequently. Please do not open the door too frequently. [. . . ]