User manual HAIER HLTDC19

[. . . ] HLTDC15/HLTDC19/HLTDC20 LCD TV USER MANUAL Please read this manual carefully before using this TV set and keep it for future reference. Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock, is present within the cabinet of this unit. ATTENTION The Owner's Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. 1. [. . . ] CC2 to CC4: For other modes of video related broadcast information. TT1: For program guide and other information displayed by broadcasters. (This blocks a large portion of the picture on your screen). TT2 to TT4 :For other modes of information displayed by broadcasters. (This blocks a large portion of the picture on your screen). IMPORTANT: Closed captioning availability entirely depends on broadcasters supplying the signal. Therefore, closed captioning might not always be available and language availability will differ by broadcast. Menu Operations Function Menu Options Continued Note: Select CC1 for full translation of the primary language such as English in your area. Select CC2 for secondary language translation such as French or any other language that may be broadcast in your area. 4. BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set ON, the screen will turn blue after 3 seconds if there is no signal. RESET : Press VOL+ to reset some settings to the factory default . Adjust Menu Options 1. Press MENU and VOL+/VOL- button until the following menu appears on the screen ADJUST AUTO CONFIG PHASE CLOCK H POSITION V POSITION 0 50 50 50 Note: This menu appears only in PC mode . Press CH+/CH- button to enter the adjust menu and to go up and down to select the desired option . 3. Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . Repeat step 2 and step 3 until desired quality has been achieved . . Functions: AUTO CONFIG : Automatically adjusts picture location frequency and phase parameters . PHASE : Removes any horizontal distortion and clears or sharpens the displayed characters . CLOCK : Adjust the TFT-LCD to match the PC input source clock frequency H-POSITION : Picture horizontal position adjust V-POSITION : Picture vertical position adjust . Menu Operations Tuning Menu Options 1. Press MENU and VOL+/VOL- button until the following menu appears on the screen TUNING CHANNEL SKIP AFC FINE TUNE ANTENNA AUTO PROGRAM 1 OFF ON CATV Note: This menu appears only in TV mode . Press CH+/CH- button to enter the tuning menu and to go up and down to select the desired option . 3. Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired settings have been achieved . Functions: 1. CHANNEL : Press VOL+/VOL-to go up and down to set the channel position. [. . . ] Parental Password Default Change PLAY/ENTER Old Password New Password Confirm Pwd NOTE:If you forget your password or a password is accidentally set enter 1369 as the password. This will enable you to regain control. DVD System Setup(Continued) DVD System Setup SETUP DEFAULT: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. . . Preference Page. . Parental Password Default Reset PLAY/ENTER Note: Some functions may not be available depending on the type of disc. Playable Discs The following discs can be played: You cannot play discs other than those listed above. [. . . ]