User manual HAIER HSU-09H03/R2

[. . . ] SPLIT TYPE ROOM AIR CONDITIONER OPERATION MANUAL HSU-09H03/R2(DB) HSU-12H03/R2(DB) Please read this operation manual before using the air conditioner. No. Cautions Disposal of the old air conditioner Before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of child entrapment. It must be noticed that air conditioner system contains refrigerants, which require specialized waste disposal. The valuable materials contained in an air conditioner can be recycled . Contact your local waste disposal center for proper disposal of an old air conditioner and contact your local authority or your dealer if you have any question. [. . . ] Press it once again, lock will be cancelled and lock condition display disappears. CODE Used to select CODE A or B with a press, A or B will be displayed on LCD. Please select A without special explanation. 1. SWING button Used to select up or down air sending direction. MODE button Used to select operation mode. TIMER button Used to select TIMER ON, TIMER OFF, TIMER ON-OFF. RESET When the remote controller appears abnormal, use a sharp pointed article to press this button to reset the remote controller normal 6. Operation mode display COOL DRY HEAT Parts and Functions Remote controller's operation When in use, put the signal transmission head directly to the receiver hole on the indoor unit. The distance between the signal transmission head and the receiver hole should be within 7m without any obstacle as well. Don't throw the controller, prevent it from being damaged. When electronic-started type fluorescent lamp or change-over type fluorescent lamp or wireless telephone is installed in the room, the receiver is apt to be disturbed in receivering the signals so the distance to the indoor unit should be shorter. Loading of the battery Load the batteries as illustrated. 2 R-03 batteries, resetting key (cylinder) Remove the battery cover: Slightly press " " and push down the cover. ¡/ TM ¨"ª ±, OE °"Õ ª" «Î-- ±º ÿ»° 7# ÿ, § ´µÁ Î `Y £, « µÁ ¬©"«Î Á"^"Ï ÷÷"Û ¿÷ ^, 6 ^°£ ÿ»° `/ "÷­» ÿ°£ ´µÁ ¬µÁ µ£° æ »Î­ Õ« fi<´À £°ºØ ~"­oe ø'µ~ «Î--°"Õ¨"ª¡/ 7# µÁÿ, § ±ºª" ±, OETM ¿÷¬©"«Î´µÁÿ»° ^°£ `/ "÷­»Á"^"Ï£, «Î ´µÁÿ»°^, 6÷÷"Û`Y »Î­¬µÁÿ°£ £°ºØÕ«µ£° ø'µ~~"­oefi<´Àæ «Î--°"Õ¨"ª¡/ 7# µÁÿ, § ±ºª" ±, OETM ¿÷¬©"«Î´µÁÿ»° ^°£ `/ "÷­»Á"^"Ï£, «Î ´µÁÿ»°^, 6÷÷"Û`Y »Î­¬µÁÿ°£ £°ºØÕ«µ£° ø'µ~~"­oefi<´Àæ Load the battery: Be sure that the loading is in line with the" + "/"-" pole request as illustrated. Put on the cover again Confirmation indicator: In disorderation, reload the batteries or load the new batteries after 6mins. Note: Use two new same-typed batteries when loading. If the remote controller can't run normally or doesn't work at all, use a sharp pointed item to press the reset key. Hint: Remove the batteries in case unit won't be in usage for a long period. If there are any display after taking-out just need to press reset key. Power failure resume(please set and apply as necessary) If sudden power failure occurs, the unit will resume original operation when power is supplied again. Note: When sudden power failure happens during unit operation in power failure resume mode, if the air conditioner is not desired for use in a long period, please shut off the power supply in case that the unit automatically resume operation when power is re-supplied, or press ON/OFF to turn off the unit when power resumes. Operation Cool/Dry mode Operation 1. Press ON/OFF on the remote controller, unit start. The liquid crystal will display the working state of last time (Except Timer, Power/Soft ). Select operation mode Press MODE button. For each press, operation mode changes as follows: Remote controller: COOL DRY HEAT Remote Controller Then select COOL or DRY operation 3. Select temp. setting Press TEMP. button Every time the button is pressed, temp. setting increase 1 C, if kept depressed, it will increase rapidly Every time the button is pressed, temp. setting decrease 1 C, if kept depressed, it will decrease rapidly Select a desired temperature. For each press, fan speed changes as follows: Remote controller: AUTO HI MED LOW Air conditioner is running under displayed fan speed. When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature. Unit stop Press ON/OFF button, the unit stops. 8 Operation Heat Operation 1. Press ON/OFF on the remote controller, unit start. [. . . ] When the remote controller is manipulated, it gets the system back to the normal operation mode. Maintenance For Smart Use of The Air Conditioner Setting of proper room temperature Do not block the air inlet or outlet Close doors and windows Use the timer effectively during operation If the unit is not to be used Use the louvers effectively for a long time, turn off the power supply main switch. 15 Maintenance For Smart Use of The Air Conditioner WARNING Before maintenance, be sure to turn off the system and the circuit breaker. Remote Controller Indoor Body Do not use water, wipe the controller with a dry cloth. Do not use glass cleaner or chemical cloth. Wipe the air conditioner by using a soft and dry cloth. For serious stains, use a neutral detergent diluted with water. Wring the water out of the cloth before wiping, then wipe off the detergent completely. Do not use the following for cleaning Gasoline, benzine, thinner or cleanser may damage the coating of the unit. Hot water over 40 C(104 F) may cause discoloring or deformation. o o Air Filter Cleaning Open the inlet grille by pulling it upward. [. . . ]