User manual HAIER HSU-09RB03R2

[. . . ] AS072AFEAA AU072ACEAA (HSU-07RB03/R2) AS092AFEAA AU092ACEAA (HSU-09RB03/R2) AS122AFEAA AU122AKEAA (HSU-12RB03/R2) No. 0010546279 Colorful light bar indicator OPERATE AS072AFEAA AU072ACEAA (HSU-07RB03/R2) AS092AFEAA AU092ACEAA (HSU-09RB03/R2) AS122AFEAA AU122AKEAA (HSU-12RB03/R2) 11. Operation mode display Operation mode Remote controller 16. [. . . ] And it can adjust indoor temperature in order to reach or approach to the set temperature. Cool Operation Link with electric power. The liquid crystal will display the working state of last time (Except Timer, Sleep, Power/Soft and Health airflow). COMPLETE AUTO On the displaying board, colorful displaying bar will be blue. Air conditioner is running under displayed wind speed. Dry Operation Link with electric power. The liquid crystal will display the working state of last time (Except Timer, Sleep, Power/Soft and Health airflow). COMPLETE AUTO The colorful displaying bar on the displaying board will display water-like color. Air conditioner is running under displayed wind speed. unit will run ten minutes and then stop six minutes. Fan Operation Link with electric power. The liquid crystal will display the working state of last time (Except Timer, Sleep, Power/Soft and Health airflow). COMPLETE AUTO The colorful displaying bar on the displaying board will display pink. Heat Operation Link with electric power. The liquid crystal will display the working state of last time (Except Timer, Sleep, Power/Soft and Health airflow). COMPLETE AUTO On the displaying board, colorful displaying bar will be red. Air conditioner is running under displayed wind speed. Hints: When making coolness, wind orientation should adjust to the horizontal state in favor of air circulating in the room for cool air will agglomerate upside. When making heat, wind orientation should adjust to the slanting down state in favor of air circulating in the room for hot air will agglomerate downside. Sleep Operation more 3 rises The sleeping hour lasts 8 hours and couldn't be adjusted. When timing on function is set, the sleeping function can't be set up. After the sleeping function is set up, if user resets timing on function, the sleeping function will be cancelled; the machine will be in the state of timing-on. If the sleeping function and timing-on function are set up at the same time, no matter which one is operated earlier, the machine will be off automatically, and the other function will also be cancelled. Power/Soft Operation The liquid crystal will display the working state of last time (Except timer, sleeping, power/soft and health airflow). When machine is running in emergency, the set value and wind speed of temperature couldn't be altered; meanwhile, it can't operate for dehumidifying or under timing mode. Clean the Outlet Grille and the Fan of the Indoor Unit After being used for long time, there will be accumulated lots of dirt on the fan. User can close the machine, cut off electric power and then disconnect and clean it. Take off vertical louvers Push through the fixed bolt of the louvers on the right, take off vertical louvers and clean it. Draw out horizontal louvers Pinch the handle of the horizontal louvers, put them down forward anddraw them out slightly. Clean the horizontal louvers with dishcloth. Clean the out-let grille and the fan Clean the dirt around out-let grille with dishcloth. Turn fans around slightly with hands, cleaning fans when turning them around. Installing back the horizontal louvers Pinch the handle of the horizontal louvers; push them into the slot backwards. Installing back the vertical louvers First aim the slot on the right of the vertical louvers to the bottom of electric machinery axis, insert the axis on the right into the fixed aperture, and lock up the fixed bolt on the right. Note: The upside and downside of the vertical wind leading board are different, please distinguish them. 0010202195 indicates the up side one and serial No. [. . . ] But it must be noticed to use the vacuum cleaner frequently to adsorb the dusts covering the purifying filter lest the covering dusts effect the function of the bacteria-killing medium air purifying filter. (It is strictly prohibited for the bacteria-killing medium air purifying filter to be washed) [. . . ]