User manual HAIER HSU-24LEA03-T

[. . . ] Installation shall be done by professional people, don't install unit by yourself. For the purpose of the safety, the air conditioner must be properly grounded in accordance with specifications. Always remember to unplug the air conditioner before openning inlet grill. Never unplug your air conditioner by pulling on the power cord. [. . . ] setting. 2. RESET When the remote controller appears abnormal, use a sharp pointed article to press this button to reset the remote controller normal. 22. TEMP button Used to select your desired temperature. 3. LIGHT button Control the lightening and extinguishing of the indoor LED display board. 25. FAN button Used to select fan speed: LOW, MED, HI, AUTO. 26. HEALTH AIRFLOW button Used to set the health airflow mode. 4. TIMER button Used to select TIMER ON, TIMER OFF, TIMER ON-OFF. 27. SLEEP button Used to select sleep mode. 5. CLOCK button Used to set correct time. 28. SET button Used to confirm timer and clock settings. 6. HEALTH button Used to set healthy operation. 29. POWER/SOFT button Use to set power/soft function. 7. MODE button AUTO COOL DRY FAN HEAT 30. LOCK Used to lock buttons and LCD display. If pressed, the other buttons will be disabled and the lock condition display appears. Press it once again, lock will be cancelled and lock condition display disappears. 8. HOUR button Used to set clock and timer setting. 9. SWING button Used to select up or down air sending direction. 31. ON/OFF button Used for unit start and stop. NOTE: The following functions and related displays are not available: 20 Cooling only unit do not have displays and functions related with heating 6 Operation HEALTH operation Remote controller 1. Unit start Press ON/OFF on the remote controller, unit starts. Health function includes health anion function. 2. Health anion function Press HEALTH button. Air conditioner starts health anion function operation. For twice press, disappears, the operation stops. When indoor fan motor is running, it has healthy process function. (It's available under any mode) POWER/SOFT When the fan in the indoor unit does not work, the health lamp lights up, but the anion generator does not release anion. BRIEF INTRODUCTION TO HEALTH ANION FUCTION The anion generator in the air conditioner can generate a lot of anion effectively balance the quantity of position and anion in the air and also to kill bacteria and speed up the dust sediment in the room and finally clean the air in the room. 8 Operation Air Flow Direction Adjustment 1. Status display of air sending Vertical flap Pos. 1 Pos. 2 Pos. 3 Pos. 4 POWER/SOFT Pos. 5 Pos. 6 (Auto swing) 2. Up and down air flow direction For each press of SWING button, air flow direction on remote controller displays as follows according to different operation modes: COOL/DRY/FAN Pos. 1 Pos. 2 Pos. 3 Pos. 4 Pos. 6 remote controller: : HEAT: remote controller: AUTO: remote controller: Pos. 5 Pos. 4 Pos. 3 Pos. 2 Pos. 1 Pos. 6 Pos. 1 Pos. 2 Pos. 3 Pos. 4 Pos. 5 Pos. 6 The vertical flap will swing according to the above positions Note:When restart after remote turning off, the remote controller will automatically memorize the previous set swing position. 14 Operation Sleep Operation Before going to bed, you can simply press the SLEEP button and unit will operate in SLEEP mode and bring you a sound sleep. [. . . ] This is because the system circulates smells from the interior air such as the smell of furniture, paint, cigarettes. During COOL or DRY operation, indoor unit may blow out mist. This is due to the sudden cooling of indoor air. Noise is heard Normal Performance inspection Smells are generated. Mist or steam are blown out. In dry mode, fan speed can't be changed. In DRY mode, when room temperature becomes lower than temp. setting+2oC, unit will run intermittently at LOW speed regardless of FAN setting. Is fuse blownout? Multiple check Poor cooling Is the air filter dirty? [. . . ]