User manual HAIER HVTM08

[. . . ] This wine cellar should not be recessed or built-in an enclosed cabinet. Do not operate your wine cellar in the presence of explosive fumes. Do not store foods in wine cellar as interior temperature may not be cool enough to prevent spoilage. Before you throw away your old appliance, take off the doors. [. . . ] Insert the screws through the holes in the bracket and then into the predrilled holes on the bottom of the wine cellar (see image) 3. Plug in the wine cellar to power the unit on. You can set the temperature of your wine cellar at any setting you desire. the temperature will range from 46° to 66°. When initially turned on, the LED will show the ambient. By pressing the ( ^ ) temperature button on the display you can increase the temperature and pressing the ( v ) temperature button will lower the temperature. Your wine cellar also has a light for your viewing pleasure. A light switch on the control panel will activate the light manually. Under normal operation it is best for the light to remain off. please note that the actual cabinet temperature in a thermoelectric unit is dependent on the ambient temperature. You may set the cabinet temperature within range but the unit may not reach the preset temperature. For this model, when the ambient temperature is 77°, the lowest temperature that can be reached is 50-52°. When ambient temperature is 73°, the cabinet temperature can reach approximately 46-48°. When the ambient temperature is below the pre-set temperature, the cellar will not operate until the ambient temperature increase to higher than the pre-set temperature. Thermoelectric (also referred to as semiconductor) wine cellars do not use a compressor and therefore create minimal noise and vibration. Besides being extremely quiet, the lack of vibration will prevent bubbles from forming in stored wine. In addition thermoelectric units offer high reliability and low maintenance while precisely maintaining the preset temperature for storing wine. The shelves are chrome plated for appearance and easy cleaning. To maintain proper product cooling and longevity the fan filter should be removed and cleaned every 6 months, or sooner, to remove dirt, dust and hair that can accumulate causing the cooling system to not function properly. ALWAYS UNPLUG THE UNIT PRIOR TO CLEANING THE FAN FILTER There are two effective methods to clean the external fan filter: · A vacuum cleaner can be used to remove the dirt, dust and hair that has built-up. [. . . ] For the name of the nearest service center please call 1-877-337-3639. Damage from misuse, abuse, accident, alteration, lack of proper care and maintenance or incorrect current or voltage. Damage from service by other than an authorized dealer or service center. THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE The remedy provided in this warranty is exclusive and is granted in lieu of all other remedies. [. . . ]