User manual HAIER HWD80-1482-F

[. . . ] This appliance must be properly installed in accordance with the installation instructions before it is used. Never unplug your appliance by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet. Replace immediately worn power cords, loose plugs/power outlets. [. . . ] it can display the setting time of scheduled washing and heating temperature. The screen displays only the hour if the time setting is over 10 hours. Touch this button to set washing cycle with cold or hot water. Lock buttons on the control panel, including the Power button, by pressing this button for 3 seconds. These can be unlocked if the button is pressed for another 3 seconds. The prewash function can be added into the washing program. The related time and water level in the drum can be selected by pressing this button according to the laundry quantity. The quantity indicator changes its position according each time the laundry quantity button is pressed. We suggest using the first gear when the quantity is less then 2 lbs. ; use the second gear when the quantity is less then 6 lbs. , and use the last gear when the quantity more then 6 lbs. Ordinary clothes washing self defined washing program according to the habit of the operator For not very dirty clothes for night washing For thick or heavy clothes cashmere and wool fabrics dry the ordinary laundries dry the ordinary laundries anti-virus procress for dried laundry Evenly load the laundry in the washing machine and then tightly close the door of the unit. When first using the washing machine, let it run unloaded for one program to prevent the laundry from being stained by oil or dirty water from the washing machine. Partition 2: Put the detergent in this partition no matter whether the prewash function is selected or not. Partition 3: Put the softening agent in this partition if the laundry has gone through the softening process. Do not add liquid detergent into partition 1and 2. For prewashing program, detergent should be added to both partition 1 and 2; for other programs, do not add detergent to partition 1. Do not overuse softening agent as this may damage artifical fabrics. First connect the mains and select the power on/off button. The above operation should be under the condition of no power down. The machine will continue its previous program since the machine has the memory function after the power down. The memory function can be canceled by turning off the power and restart it. [. . . ] Limited Warranty After one year from the original retail purchase date, Haier will provide a part at no cost, as indicated below, to replace said part as a result of a defect in materials or workmanship. Haier is solely responsible for the cost of the part. All other costs such as labor, trip charge, etc are the responsibility of the owner. Third through Fifth Year Haier will provide the cabinet assembly should the cabinet rust through Third through Tenth Year Haier will provide the inner stainless steel wash tub. [. . . ]