User manual HAIER L30CV6-A1

[. . . ] - Servicing the unit yourself may cause an electric shock or fire. Keep the power adapter away from any heat source. - This may cause a fire. If there are any unusual sounds or smells coming from the unit, unplug it immediately and contact an authorized dealer or repair service. General Precautions continued Do not use or store inflammable substances near the unit - This may cause an explosion or fire. Place the unit away from the wall for well ventilation. - This may cause a fire. Place the antenna away from the electric wire, not to touch even though it falls down by wind. - This may cause an electric shock. Do not touch the plug with wet hands. [. . . ] It is not the trouble of the TV (the picture will reach a normal brightness after a while). There might be separate brightness or scotomas on the screen, or there might be some blue, green or red dots which are dead pixels. These won't affect the LCD screen. Switching Your Television On And Off Standby set plug the lead into an appropriate socket, then press the Power Switch button on the back , and the red power indicator will light. PC STILL INPUT POWER AUTO CLOCK MUTE DISPLAY 1 If the TV is in the state of standby, press the Power key on the remote control or on the back panel of the set, then you can switch standby to on state. 2 Press the Power button again to get into the standby state. NOTE: If the set is on state, press the Power button, the set can switch into the standby state. Programs Selecting And Volume Adjusting CH VOL Press CH / buttons or direct-digit button to select the program which you favorite. Press VOL / keys to adust the volume . Quick View Function Press the Q. VIEW/HOLD key to go back to the channel you viewed. Mute Function 1 press MUTE button, a sign will appear of the screen, and the sound of the set is cut off. 2 In order to recover the sound, press the MUTE button or VOL / buttons. Choosing The Language Of The Display On The Screen Display the sub menu and select the language item. Language English Off 1 2 3 Press the MENU button to select the Setup sub menu. Press Press buttons to select the Language item. buttons to select the language. Tint 50 Manual Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. 1 2 Press MENU button repeatedly to select Ch. Press buttons to select Fine Tune. Manual Store ATM Fine Tune Add/Erase Sound System Off D/K 3 Press buttons repeatedly to start fine-tune until the picture and the sound becomes satisfactory. And press EXIT button to disappear the menu. <V->/<V+> key to change Skip The Channel Which You Don't Want 1 Press buttons or direct-digit choosing button to select a channel you want to skip. Press MENU button continuously to select Ch Press Press buttons to select Add/Erase. disappear the menu. 2 3 4 5 Press EXIT key When you select channels with button, this channel will be skipped, However, you can also use the Direct-digit Choosing button on the remote control to select this channel directly. Note recover the skipped channel 1 Use Direct-Digit Choosing button to select the number of the channel to be recovered. you may press the STILL button or any other key again to continue the playing. NOTE This function is not available in PC DVI mode. YPbPr AUTO CLOCK MUTE DISPLAY TELETEXT FUNCTIONS Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc. ). You can press TEXT button into TEXT mode, press again to leave TEXT mode. All menu related functions are notavailable in TEXT mode. [. . . ] Press VOL+/- buttons to increase or decrease the sound volume. No sound will be heard if MUTE button is pressed. L HEADPHONE PC- R L R S-VIDEO VIDEO IN Y IN POWER ANT. AUDIO IN AUDIO IN AUDIO IN Cb/Pb Cr/Pr SCART CONNECTED TO PC AS A MONITOR VGA INPUT L HEADPHONE PC- R L R S-VIDEO VIDEO IN Y IN POWER ANT. AUDIO IN AUDIO IN AUDIO IN Cb/Pb Cr/Pr D-SUB IN DVI IN SCART To PC AUDIO IN To D-SUBIN 1 2 3 4 Connect PC VGA output port with television D-SUBIN port. Connect PC audio cable to television PC Audio IN port. Turn on PC and PC images will be displayed on the television screen. Resolution Resolution Horizontal (KHz) Vertical (Hz) 1 2 3 When the television temperature is low, initial pictures might flicker a bit. [. . . ]