User manual HAIER LTF42R3A

[. . . ] Please read this manual carefully before operating the unit, and keep it for future reference. Welcome Important information Safety notice Electrical connections P. Get to know your TV Get to know your remote control Connecting your TV Preparation of your remote control P. Setting up Tuning your TV Common interface Using your TV Adjusting picture settings Adjusting sound settings Function settings Time settings Lock menu settings Shortcut menu display P. [. . . ] This sound setting can be adjusted to suit your personal preference. Press press Press button to select Primary/Secondary item, and then button to select the languages you needed. When you are satisfied with your choice, press the EXIT button to return to normal viewing or press MENU button to return to the previous menu. You can quickly select the desired mode by ARC button on the remote control. 4:3 mode Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides. 16:9 mode Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. Zoom1 Choose Zoom1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Zoom2 Choose Zoom2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. Wide Choose Wide when you want to adjust the picture in a non-linear proportion, that is, more enlarged at top sides and no alteration, at bottom side. Blue Screen This will select the character background colour. SCART Input When you use the SCART2 input , make sure the input source is AV or S-VIDEO, and set the SCART INPUT option. OSD Time Out To s et how long you want the menus to appear on-screen. Each press of button repeatedly to select the number of preset minutes, the Time will be set in sequence: off, 10sec, 15sec, 30sec, 45sec, 60sec. NOTE: In DTV mode, because the time information is from the signal, the Clock and Date are not able to be changed. If you want to change the time, turn off the TV in ATV mode, then turn on the TV. The TV will remember it after your setting, that will be the volume when turn on the TV next time. Press the age of children who will watch TV. Press button to unlock all set modes, setting all lock options to off, and the maximum volume returns to 100. You can press the EXIT button to cancel the changes at anytime. You can press the EXIT button to cancel the changes at anytime. [. . . ] If you want to cancel this function, press PROGRAM and move to STOP, then press PLAY/PAUSE. ANGLE When enjoying sports, concert or theatre, press this key to watch same actions in different angles. (Valid for discs possessing this function. Using a disc recorded in multi-angle you can view the scene from different angles, for example, front, side, whole view and exterior scene. [. . . ]