User manual HAIER P42S6A-C2

[. . . ] PLASMA TV OWNER`S MANUAL MODEL S :P42S6A-C2 Please READ this manual carefully before operating your TV, and retain it for future reference. Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product. [. . . ] 4 Select a particular language by pressing VOL+/- button repeatedly. 5 When you are satisfied with your choice, press MENU button to return to previous or press EXIT button to return to TV viewing. Select input modes Choose the input source If you hope to enjoy the picture from the external input source, before to select the source, you need to connect the devices, otherwise, when you select the source, the none or no signal will appears on the screen. MUTE STILL SCAN SLEEP PIP DISPLAY Press INPUT or TV/AV button on Source ABC@ DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP television or remote controller, the menu appears on the screen. Then press CH+/- to select the TV item, and press VOL+ to ensure it. TV: the input source from ANT IN terminal output. SCART1: the input source from SCART1 terminal output. SCART2: the input source from SCART2 terminal output. HDTV: the input source from YPbPr terminal output. VGA: the input source from VGA IN terminal output. P. STD S. STD CH+ VOL- MENU VOL+ CH- H. LOCK CH. LIST TIMER ZOOM EXIT HDMI: the input source from HDMI IN terminal output. Before watching TV program, you need to ensure your TV in TV mode. Memory function When menu parameter is to be modified, the set picture and sound status and preset program will be remembers as menu exit. Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Full automatic search mode Automatic search MUTE STILL 1 Press MENU button and then CH+/- button, the icon to TUNING menu. PIP DISPLAY SCAN SLEEP ABC@ DEF GHI$ JKL% MNO to enter submenu, and press CH+/- button to select "country" first according to yourself that means you have selected the sound system, this is useful especially for France ), and then press CH+/button to select "Auto Search" item. 2 Press the VOL+/- buttons POR& STUV WXYZ TV/AV *#() SWAP P. STD S. STD CH+ MENU VOL+ VOL- MENU PICTURE AUDIO CH- Tuning Program Country Auto Search Program Table England ADJUST TUNING FUNCTION TIMER H. LOCK CH. LIST TIMER ZOOM EXIT Note : the TUNING menu will be only operated in normal TV mode. Press the VOL+/- button to ensure automatic search with higher level. Note: If you have set Tuner Lock in Lock Set menu. Password must be entered when operating menu tuning. Otherwise there will be Tuner Lock display on screen. 3 VHF-L 188. 16 MHz After the s e arch has finished, all channels now playing program will be automatically preset in order. Tuning menu Program Table Press MENU button and then CH+/- button, the icon to TUNING menu. 1 MUTE STILL SCAN SLEEP PIP DISPLAY ABC@ DEF Press VOL+/- button to enter submenu, and press CH+/- button to select "Program Table", press VOL+ button to enter. Or press CH. LIST button on remote controller. Press CH+/- button to select the edited channel, and press button corresponding to edit. (Red button: delete channel; Green button: copy channel; Yellow button: Name channel; Blue button: Swap) 2 MENU PICTURE AUDIO ADJUST TUNING FUNCTION TIMER Tuning Program Country Auto Search Program Table England GHI$ JKL% MNO POR& STUV WXYZ 3 TV/AV *#() SWAP Program Table 001 002 003 004 005 006 007 008 009 010 Red: Del; Green: Copy; Yellow:Name; Blue: Swap P. STD S. STD CH+ VOL- MENU VOL+ CH- Delete name H. LOCK CH. LIST TIMER ZOOM EXIT Press CH+/- to select the channel, and press the red button on the remote controller to delete, then press MENU button to delect name. Copy channel Press CH+/- to select the channel, and press the green button on the remote controller, then press CH+/- button to select the channel to copy, press again the green button then press MENU button to ensure. Name channel Press CH+/- to select the channel, and press the yellow button on the remote controller, and press the yellow button to display the digital and letter list, press Vol+/- or CH+/- to select the desired digital or letter, press the yellow button to exit list, then press MENU button to ensure. Swap channel Press CH+/- to select the channel, and press the blue button on the remote controller, then press CH+/- button to select the channel to swap, then press again the blue button to ensure. Tuning menu Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. MUTE STILL SCAN SLEEP PIP DISPLAY 1 Press CH+/- buttons or the NUMBER 0-9 button to choose desired searching frequency. 2 After calling up the TUNING menu, press CH+/- button to select "Tuning Program" item. ABC@ DEF GHI$ JKL% MNO MENU PICTURE AUDIO ADJUST TUNING FUNCTION TIMER POR& STUV WXYZ TV/AV *#() SWAP Tuning Program Country Auto Search Program Table England P. STD S. STD CH+ VOL- MENU VOL+ CH- 3 Press CH+/- to select H. LOCK CH. LIST TIMER ZOOM EXIT MENU PICTURE AUDIO ADJUST TUNING FUNCTION TIMER Manual Search item, Press VOL+ button to enter the desired frequency and press the digital button to adjust. Tuning Program Program Number Edit Name Color System Sound System Manual Search Fine Tuning Skip Off 18 C 28 AUTO D/K 62. 25MHz 4 press MENU button to return to previous or press EXIT button to return to TV viewing. Tuning menu Fine Tuning If the picture and/or sound are poor, try using the FINE TUNING feature. Do not use this feature unless reception is poor. MUTE STILL SCAN SLEEP PIP DISPLAY 1 Press CH+/- button or NUMBER 0-9 button to choose desired channels 18 c 28 AUTO BG ABC@ DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P. STD S. STD CH+ 2 Press MENU button and CH+/- button, till the TUNING menu shown on the right display on the screen. 3 Press VOL+ button MENU PICTURE AUDIO ADJUST VOL- MENU VOL+ Tuning Program Country Auto Search Program Table England CH- TUNING FUNCTION TIMER H. LOCK CH. LIST TIMER ZOOM EXIT to enter submenu, and press CH+/-button to select Tuning Program item, and then press VOL+ to next submenu, and press CH+/-button again to make the icon to Fine Tuning. MENU PICTURE AUDIO ADJUST TUNING FUNCTION TIMER Tuning Program Program Number Edit Name Color System Sound System Manual Search Fine Tuning Skip Off 18 C 28 AUTO D/K 62. 25MHz VOL-/+ button all through to carry out fine tune, till the best picture and sound are obtained, then loosen the button. 4 Press Tuning menu You can watch TV program in a presetting channel. How to select the desired program 1 Using "Program number" buttons Press digit button to select the program. If 2-digit or 3-digit programs are selected , press digit buttons you needed continuously within 3 seconds . If selected channel program is set at Lock on mode and no password has been entered after initiation of the television, the screen will indicate require password entry. If wrong password is entered, channel selection will fail and previous program will still stay on the screen. [. . . ] Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen. 2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth. Extended Absence If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. Specifications and functions P42S6A-C2 Type Screen Viewing angle Diagonal Color system TV/VIDEO Sound system Video input PLASMA DISPLAY PANEL >170 (H)/170 (V) 42 PAL, SECAM, NTSC-M D/K I B/G M L, L` SCART (CVBS, Y/C, RGB), YCbCr 480i/p, 576i/p, 720p, 1080i 2x7W ~ 150-240V 50/60Hz DTV YCbCr YPbPr Sound UPO Power Dimensions (WxHxD) mm (With stand Power consumption Standby consumption 1055X320X750 Max. 260W 3W Working temperature: 5 ~35 Working humidity: 20%-80% Store temperature: -15 ~45 Store humidity: 5%~90% Condition Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Verify if the television is properly plugged. [. . . ]