User manual HAIER XIB 5C1S3FS

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Only use the dish washer after carefully reading these instructions. We recommend you always keep this manual to hand and in good condition for any future owner. [. . . ] To accept the language selection press the "START/RESET" button Immediately afterwards the "WELCOME" message will scroll on the display once and the indicator lights will all be off. Press "START/RESET" and a signal will sound, the indicator light corresponding to the selected programme will stay on and the wash indicator light will come on. Close the door (after an audible signal has sounded, the programme will start automatically). WARNING In the event that the machine remains switched on without selecting or starting any program, after 5 mins. The dishwasher will switch off automatically. Next time you switch on the appliance Decided to use will appear on the display, saving it when the dishwasher is switched on. SETTINGS MENU The dishwasher is regulated with certain factory settings. Nevertheless, from the Settings menu, you can adjust various parameters to suit your washing requirements. entering the Settings menu The dishwasher must ALWAYS be off before you start this procedure. Turn on the dishwasher by holding the The message "SETTINGS" will appear on the Display and the indicator lights of the "OPTIONS" and "EXTRA DRY" buttons will be on. Pressing the "PROGRAMME SELECTION" button you can select the parameters to be adjusted in succession (SOFTENER BUZZER MEMO FUNCTION). To adjust the SOFTENER see the specific Chapter of the manual). To adjust the BUZZER see the specific paragraph). To adjust the MEMO FUNCTION see the specific paragraph). Press the "DELAY START" and "EXTRA DRY" buttons together for 3 seconds. Buttons you can select the preferred language. To accept the language selection press the Models with Smart Loading Sensor The " AUTO SENSOR " programme, thanks to an algorithm that analyses the degree of dirtiness of the dishes in real time, automatically sets the ideal temperature and washing time, optimising water and electricity consumption Models with dirt sensor (Only on some models). "AUTOMATIC" PROGRAMMES (only on some models) Thanks to this device, the wash cycle parameters are automatically adapted to the real quantity of dirt on dishes. This is because water murkiness is linked to the quantity of dirt on dishes. Thus, excellent washing results are guaranteed while optimising water and energy consumption. "IMPULSE" PROGRAMMES (only on some models) The "IMPULSE" programmes use an impulse washing technology, which reduces consumption and noise, and improves performance. The "intermittent" working of the washing pump is NOT to be considered a malfunction; it is a characteristic of impulse washing, and therefore should be considered a normal feature of the programme. [. . . ] After checking to make sure the water supply is open, that the drain pipe is not bent and that the siphon or filters are not clogged, set the selected program again. If the fault persists, contact the Technical Assistance Centre. This dishwasher is equipped with an overflow safety device that, in the event of a problem, automatically discharges any excess water. WARNING To ensure the correct operation of the overflow safety device, we recommend not moving or tilting the dishwasher during operation. [. . . ]