Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HANNA INSTRUMENTS CHECKTEMP. We hope that this HANNA INSTRUMENTS CHECKTEMP user guide will be useful to you.
Lastmanuals help download the user guide HANNA INSTRUMENTS CHECKTEMP.
Manual abstract: user guide HANNA INSTRUMENTS CHECKTEMP
Detailed instructions for use are in the User's Guide.
[. . . ] Please check the preparation of the zero cuvette. Light Low: There is not enough light to perform a measurement. Please check the preparation of the zero cuvette.
Battery low: The battery must be replaced soon. Dead battery: This indicates that the battery is dead and must be replaced. [. . . ] Use the pipette to fill the cuvette up to the 10 mL mark with the HI 93752A-0 Ca Buffer Reagent. Magnesium: Using a 1 mL syringe add exactly 1 mL of HI 93752A-0 Mg Buffer Reagent. Use the pipette to fill the cuvette up to the 10 mL mark with the HI 93752B-0 Mg Indicator Reagent. Replace the cap and invert several times to mix. 4· Place the cuvette into the holder and ensure that the notch on the cap is positioned securely into the groove. 5· Press ZERO/CFM and the lamp, cuvette and detector icons will appear on the display, depending on the measurement phase. 6· After a few seconds the display will show "-0. 0-". The meter is now zeroed and ready for measurement. 8· Calcium: Using a 1 mL syringe add exactly 1 mL of the HI 93752B-0 Ca Oxalate reagent. Magnesium: Using another 1 mL syringe, add to the cuvette exactly 0. 5 mL of sample. Note: Do not mix up the two 1 mL syringes!5· After a few seconds the display will show "-0. 0-". The meter is now zeroed and ready for validation. 7· Place the specific CAL CHECKTM Standard Cuvette B into the cuvette holder, for: Calcium: B, CHECKTEMP-11 7 Magnesium: B, HI 96754-11 Ensure that the notch on the cap is positioned securely into the groove.
Calibration Note: It is possible to interrupt the calibration procedure at any time by pressing 4 CAL CHECK or ON/OFF keys. When calibrating, only the selected range is affected. 1· Turn the meter on by pressing ON/OFF. 2· When the beeper sounds briefly and the LCD displays dashes, the meter is ready. 3· To change the range, simply press 5 RANGE/GLP/ . 4· Press and hold CAL CHECK for three seconds to enter calibration mode. The display will show "CAL" during calibration procedure. The blinking "ZERO" asks for instrument zeroing. 6-7 5· Place the CAL CHECKTM Standard Cuvette A into the cuvette holder and ensure that the notch on the cap is positioned securely into the groove. [. . . ] If the key is kept pressed, the month number is automatically increased. 16·When the correct month has been set, press ZERO/CFM or READ/ /TIMER to confirm. Now the display will show the day blinking. 17·Press RANGE/GLP/ to edit the desired 17 day (01-31). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS CHECKTEMP
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS CHECKTEMP will begin.
