User manual HANNA INSTRUMENTS HI 38000

[. . . ] Instruction Manual SPECIFICATIONS Range 20 to 100 mg/L (ppm) as Sulfate Smallest Increment 5 mg/L from 20 to 30 mg/L 10 mg/L from 30 to 100 mg/L Analysis Method Turbidimetric Sample Size 50 mL Number of Tests 100 Case Dimensions 275x57x78 mm (10. 8x2. 2x3. 1") Shipping Weight 290 g (10. 2 oz. ) INSTRUCTIONS READ THE ENTIRE INSTRUCTIONS BEFORE USING THE KIT · Fill the plastic vessel with 50 mL of the sample, up to the mark. [. . . ] Note: mg/L is equivalent to ppm (parts per million). · Add 2 drops of Complexing Agent and swirl to mix. Note: In the case the spot on the bottom disappears with the liquid level under the 100 ppm mark , the sulfate concentration is higher than 100 ppm; in the case the spot disappears with the liquid level above the 20 ppm mark, the sulfate concentration is lower than 20 ppm. Note: To measure Sulfate in the 100 to 10000 ppm range, use the HI 38001 Sulfate Low and High Range Test Kit. www. hannainst. com Note: Any damaged or defective item must be returned in its original packing materials. ISTR38000 10/99 Dear Customer, Thank you for choosing a Hanna Product. Please read the instructions carefully before using the chemical test kit. It will provide you with the necessary information for correct use of the kit. Remove the chemical test kit from the packing material and examine it carefully to make sure that no damage has occurred during shipping. If there is any noticeable damage, notify your Dealer or the nearest Hanna office immediately. [. . . ] Read Health and Safety Data Sheet before performing this test. [. . . ]