User manual HANNA INSTRUMENTS HI 3851

[. . . ] Instruction Manual Range SPECIFICATIONS 10 to 100 mg/L (ppm) as Cyanuric Acid 5 mg/L from 10 to 30 mg/L 10 mg/L from 30 to 100 mg/L Turbidimetric 25 mL 100 275x57x78 mm (10. 8x2. 2x3. 1") 195 g (6. 9 oz. ) INSTRUCTIONS READ THE ENTIRE INSTRUCTIONS BEFORE USING THE KIT · Fill the plastic vessel with 25 mL of the sample, up to the mark. [. . . ] Note: mg/L is equivalent to ppm (parts per million). HEALTH AND SAFETY The chemicals contained in this kit may be hazardous if improperly handled. Read Health and Safety Data Sheet before performing this test. www. hannainst. com · Wait for 1 minute to allow reaction to occur. 12 9 3 6 1' PRINTED IN ITALY Dear Customer, Thank you for choosing a Hanna Product. Please read the instructions carefully before using the chemical test kit. It will provide you with the necessary information for correct use of the kit. Remove the chemical test kit from the packing material and examine it carefully to make sure that no damage has occurred during shipping. If there is any noticeable damage, notify your Dealer or the nearest Hanna office immediately. [. . . ] The turbidity is proportional to the concentration of cyanuric acid. ISTR3851 · Read the concentration in mg/L (ppm) of Cyanuric Acid in correspondence of the level of the liquid in the test tube. 10/99 [. . . ]