User manual HANNA INSTRUMENTS HI 91530K

[. . . ] 6 FUNCTIONAL DESCRIPTION HI 91532K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 OPERATIONAL GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 DISPLAY CODES GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 CALIBRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The measurement range may be changed to a higher resolution by pressing once again the ON/OFF key in HI9063 or the 0. 1/1 key in HI91532K. ON/OFF 0. 1/1 HI/LO MEMORY (HI 9063 AND HI 91531K ONLY) The maximum and minimum temperature are continuously monitored and stored in memory throughout the measuring process. These readings may be recalled at any time. Simply press either the HI or LO key to view the respective readings. The appropriate indicator ("HI" or "LO"), will be displayed along with the value retrieved from memory. The HI values will be kept stored until the CLEAR function is activated or the meter is turned off. HI LO The thermometer will carry out a brief selftest. All of the segment on the LCD will be displayed during this period. After the test the thermometer will revert to the measurement mode. °C HI LO M °F CLEAR HI/LO FUNCTION (HI 9063 AND HI 91531K ONLY) In HI9063, by pressing the CLEAR key, the present measurement reading is assigned to the highest and lowest temperature memories, i. e. both memories have equal temperature reading. The "HI" and "LO" display indicators will blink three times to notify user that cleaning process is in progress. In HI91531K, by pressing the HI and LO keys at the same time, the present temperature value is assigned to the highest and lowest temperature memories, i. e. both memories have equal temperature reading. The display will show "----" to notify the user that cleaning process is in progress. If a probe is not plugged in, the display will show "Er" in HI 9063 or "-----" in the other models. °C K CLEAR HI LO To switch your thermometer off, press the ON/OFF key. MEASURING SCALE (°C/°F) (HI 9063, HI 91530K AND HI 91531K ONLY) When the meter is turned on, it automatically defaults to the °C scale. Measurements can be performed in either the Centigrade or Fahrenheit scale. To change the scale, press the °C/°F button once. 8 HI LO °C K °C/°F 9 HOLD MODE (HI9063 AND HI91530K ONLY) The reading hold function is activated by the HOLD key. In HI9063, the measured temperature is frozen on the display when this function key is pressed, and to resume normal operational mode, press this key again. In HI91530K, keep the HOLD key pressed to freeze the reading on the display, and to resume normal operational mode, release this key. A blinking "M" on display indicates the operation mode in both models. To view the input temperature of Probe 2 (T2), press the T1/T2 key and a "K2" will appear on the display. HOLD T1/T2 K 2 M TEMPERATURE DIFFERENCE (HI93532K ONLY) The difference between the temperature measured by the two probes can be displayed by simply pressing the T key. A "" will appear on the right-hand of the display to indicate this function. T MEMORY (HI 91531K AND HI 91532K ONLY) The reading memory function is activated by the M. HOLD key. The measured temperature is frozen on the display and stored in the memory of the instrument when this function key is pressed. A "HOLD" and a blinking "MEM" on display indicates the operation mode. Once the M·HOLD key is pressed, the temperature reading displayed at that time will be stored into memory. To freeze the reading on the display, simply continue to press and hold the M·HOLD key. [. . . ] If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization number from the Customer Service department and then send it with shipping costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection. To validate your warranty, fill out and return the enclosed warranty card within 14 days from the date of purchase. Reproduction in whole or in part is prohibited without the written consent of the copyright owner, Hanna Instruments Inc. , 584 Park East Drive, Woonsocket, Rhode Island, 02895 , USA. CE DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY We Hanna Instruments Srl V. le delle industrie 12 35010 Ronchi di Villafranca (PD) ITALY herewith certify that the thermometers HI 9063 IEC 801-2 IEC 801-3 EN 55022 HI 91530K HI 91531K HI 91532K have been tested and found to be in compliance with the following regulations: Electrostatic Discharge RF Radiated Radiated, Class B Date of Issue: 01-03-1996 D. Volpato - Engineering Manager On behalf of Hanna Instruments S. r. l. Recommendations for Users Before using these products, make sure that they are entirely suitable for the environment in which they are used. [. . . ]