Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HANNA INSTRUMENTS HI 145-00. We hope that this HANNA INSTRUMENTS HI 145-00 user guide will be useful to you.
Lastmanuals help download the user guide HANNA INSTRUMENTS HI 145-00.
You may also download the following manuals related to this product:
HANNA INSTRUMENTS HI 145-00 (40 ko)
Manual abstract: user guide HANNA INSTRUMENTS HI 145-00
Detailed instructions for use are in the User's Guide.
[. . . ] SPECIFICATIONS: HI 145-00 HI 145-20
Instruction Manual
HI 145-01 HI 145-30
°C
Range
-50. 0 to 220°C
°F
-58. 0 to 428°F
Resolution 0. 1°C(-50 to199°C) 0. 1°F(-20. 0 to 199°F) 1°C(200 to 220°C) 1°F (200 to 428°F) Accuracy
±0. 3°C (-20 to 90°C) ±0. 5°F (-4 to 194°F) ±0. 4% F. S. (outside) ±0. 4% F. S. (outside) ±0. 3°C ±0. 5°F
HI 145-00 HI 145-01 HI 145-20 HI 145-30
Rugged Waterproof Thermometers
Typical EMC Deviation Battery Type Battery Life
Alkaline 1 x 1. 5V AAA type approx. 10, 000 hours of continuous use
Dimensions HI145-00/HI 145-01 92x165x38 mm (3. 6x6. 5x1. 5") HI145-20/HI 145-30 92x340x38 mm (3. 6x13. 4x1. 5")
SUGGESTIONS FOR USERS:
Before using this product, make sure that it is entirely suitable for the environment in which it is used. [. . . ] HI 145-20 (Celsius) and HI 145-30 (Fahrenheit) have been especially designed for temperature measurement of hot liquids. The stainless steel probe is 300 mm (12") long and has a 5mm (0. 2") diameter.
semi-solid samples. A minimum immersion level of 4 cm (1 ½") is recommended. · Wait for a few seconds for the display to stabilize. · To freeze the display, press the hold button. A blinking M appears on the right side of the LCD to indicate that reading has been memorized. Press either the HOLD 20. 0 M or ON/OFF button to return to normal measurement mode.
ON OFF
HOLD
HI 145
· When not in use, switch the HI 145 off, or else the meter will automatically switch off itself after 8 minutes.
· Variations in readings or fading display can
indicate a weak battery (see below).
OPERATION: · Turn the HI 145 on. "CAL" will appear on the LCD, to indicate an automatic calibration check. Subequent to a successful cali20. 0 bration check, the LCD will display "-0-". If the calibration check is unsuccessful, the LCD will display "ERR", which means the meter requires factory calibration. [. . . ] Battery should only be replaced in a safe area using an alkaline type. PROTECTIVE CAP: With the thermometer, is supplied with a protective cap, which can also be used to hold the thermometer on the side of a vessel. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS HI 145-00
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS HI 145-00 will begin.
HANNA INSTRUMENTS HI 145-00 (40 ko)
