Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HANNA INSTRUMENTS HI 147-01. We hope that this HANNA INSTRUMENTS HI 147-01 user guide will be useful to you.
Lastmanuals help download the user guide HANNA INSTRUMENTS HI 147-01.
Manual abstract: user guide HANNA INSTRUMENTS HI 147-01
Detailed instructions for use are in the User's Guide.
[. . . ] Instruction Manual
HI147-00 · HI147-01
Checkfridge Thermometers with Cal-Check®
Dear Customer, Thank you for choosing a Hanna product. This manual will provide you with the necessary information for correct operation. If you need additional technical information, do not hesitate to e-mail us at tech@hannainst. com. [. . . ] Any defective item must be returned in its original packing.
Hanna Instruments reserves the right to modify the design, construction and appearance of its products without advance notice.
IST147R3 07/05
www. hannainst. com
1. TEST/READ switch
SPECIFICATIONS
HI 147-00 Range -50. 0 to 150. 0°C Resolution 0. 1°C Accuracy (@25ºC/77ºF) ±0. 3°C (-20 to 90°C) ±0. 5°C (outside) Typical EMC Deviation ±0. 5°C HI 147-01 Range -58. 0 to 302°F Resolution 0. 1°F (-58. 0 to 199. 9°F), 1°F (200 to 302°F) Accuracy (@25ºC/77ºF) ±0. 6°F (-4 to 194°F) ±1°F (outside) Typical EMC Deviation ±1°F Common specifications Probe stainless steel probe with 1m cable Battery Type/Life 1 x 1. 5V AAA approx. 3 years of continuous use Dimensions 93 x 39 x 31mm (3. 7x1. 5x1. 2") Weight 60 g (2. 1 oz. )
OPERATIONAL GUIDE
TAKING MEASUREMENTS · Turn the meter ON and set the TEST/READ switch in the READ position. · The temperature value will be displayed on the LCD. · Wait a few seconds for the reading to stabilize. CALIBRATION CHECK® Set the TEST/READ switch in the TEST position. If the meter is calibrated, in a few seconds the display will stabilize and show "0. 0" for HI 147-00, or "32. 0" for HI 147-01. To return to measurement mode, move back the TEST/READ switch to READ. Contact your dealer or the nearest Hanna Service Center for recalibration, if necessary. Notes: · Do NOT wrench the probe or put heavy objects on the cable. If the cable is damaged, the meter needs to be replaced.
· Variations in readings or fading display can indicate a low battery level.
CE DECLARATION OF CONFORMITY
Recommendations for Users Before using these products, make sure that they are entirely suitable for the environment in which they are used. Operation of these instruments in residential areas could cause unacceptable interferences to radio and TV equipment. Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC performance. To avoid electrical shock, do not use these instruments when voltages at the measurement surface exceed 24 Vac or 60 Vdc. [. . . ] When shipping any instrument, make sure it is properly packaged for complete protection. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Replace the cover and tighten the two screws. Battery should be replaced only in a safe area and using the battery type specified in this instruction sheet. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS HI 147-01
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS HI 147-01 will begin.
