User manual HANNA INSTRUMENTS HI 149-01

[. . . ] ACCESSORIES Instruction Manual 90mm 3. 5" 195mm 7. 7" PROBE EPW: probe with sharp tip for penetration HI 149-00 · HI 149-01 PROBE ELW: probe for general use and liquids 90mm 3. 5" 235mm 9. 3" Remote Probe Thermometer PROBE ECW: probe for air and gas 90mm 3. 5" 240mm 9. 4" PROBE EMW: surface probe 90mm 3. 5" 270mm 10. 6" Foodcare WARRANTY These meters are warranted for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. The probes are warranted for a period of six months. [. . . ] If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer Service department and then send it with shipment costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection. IST149R2 SUGGESTIONS FOR USERS Before using this product, make sure that it is entirely suitable for the environment in which it is used. Operation of this instrument in residential area could cause unacceptable interferences to radio and TV equipments, requiring the operator to take all necessary steps to correct interferences. Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC performance. To avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed 24 Vac or 60 Vdc. To avoid damages or burns, do not perform any measurement in microwave ovens. 06/05 www. hannainst. com HI 149 is a portable K-type thermocouple thermometer for routine checks in the food industry. Thanks to the user-replaceable probe, HI 149 can be used in a wide range of applications. You have a choice of four probes, specifically manufactured to measure the temperature of liquids, air, surface, solids and semi-solids. Two models are available for measurement in degrees Celsius (HI 149-00) and Fahrenheit (HI 149-01). LIQUID CRYSTAL DISPLAY · To change the probe, open the rear cover of the unit and release the probe connector prior to inserting the new probe. · When not in use, switch the HI 149 off. [. . . ] ±2°C ±4°F Probe Interchangeable, stainless steel, with 1 m (3. 3') cable Battery Type 3 x 1. 5V Battery Life Approx. 700 hours of continuous use Environment 0 to 50°C (32 to 122°F); RH max 95% Dimensions 106 x 68 x 21 mm (4. 2x2. 7x0. 8") Weight 80 g (2. 8 oz. ) [. . . ]