User manual HANNA INSTRUMENTS HI 710040

[. . . ] WARRANTY All Hanna Instruments meters are guaranteed for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. [. . . ] If the repair is not covered by the warranty, you will be notified of the charges incurred. If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer Service department and then send it with shipment costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection. IST710040 04/05 INSTRUCTIONS HI 710040 Inductive Battery Recharger with No External Contact Hanna Instruments reserves the right to modify the design, construction and appearance of its products without advance notice www. hannainst. com PRELIMINARY EXAMINATION Remove the material and sure that no shipment. instrument from the packing examine it carefully to make damage has occurred during there is any damage, notify OPERATIONAL GUIDE Plug the power adapter to the recharger and to the mains. Put the meter on the recharger as shown in the below picture, and the LED will turn to orange to indicate that the battery is charging. Some meters feature the indication of battery charging status. The battery recharger is supplied complete with power adapter and instructions. Note: Conserve all packing material until the instrument has been observed to function correctly. Any defective item must be returned in its original packing. GENERAL DESCRIPTION The HI 710040 battery recharger features an inductive system for battery recharge, with no external contact. [. . . ] Always unplug the recharger when not in use. [. . . ]