User manual HANNA INSTRUMENTS HI 95502

[. . . ] This warranty is limited to repair or replacement free of charge. Damages due to accidents, misuse, tampering or lack of prescribed maintenance are not covered. If service is required, contact the dealer from whom you purchased the instrument. If under warranty, report the model number, date of purchase, serial number and the nature of the failure. [. . . ] 13 TEMPERATURE PROBES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2 SPECIFICATIONS OF HI 9041C & HI 9041F Main features: · · · · HI 765 probes series Available HI 765 accuracy test plugs Remaining battery life indication / low battery detection Available in °C or °F models · · · · · SPECIFICATIONS OF HI 9061C & HI 9061F Main features: HI 765 probes series Available HI 765 accuracy test plugs Remaining battery life indication / low battery detection Available in °C or °F models Waterproof casing Range Resolution Accuracy Typical EMC Deviation Probe Battery Environment Dimensions Weight HI 9041 -50. 0 to 150. 0°C (HI 9041C) -58. 0 to 302. 0°F (HI 9041F) 0. 1°C / 0. 1°F ±0. 4°C / ±0. 8°F excluding probe error ±0. 5°C / ±1°F with HI 765BL probe HI 765 series 1x9V (6LR61) / approx. 700 hours of use -10 to 50°C (14 to 122°F); max 95% RH non-condensing 180 x 83 x 40 mm (7. 1 x 3. 3 x 1. 6") 226 g (8 oz) 4 Range Resolution Accuracy Typical EMC Deviation Probe Battery Environment Dimensions Weight HI 9061 -50. 0 to 150. 0°C (HI 9061C) -58. 0 to 302. 0°F (HI 9061F) 0. 1°C / 0. 1°F ±0. 4°C / ±0. 8°F excluding probe error ±0. 5°C / ±1°F with HI 765BL probe HI 765 series 4x1. 5V AA (LR6) / approx. 2000 hours of use -10 to 50°C (14 to 122°F); 100% RH 196 x 80 x 60 mm (7. 7 x 3. 1 x 2. 4") 425 g (15 oz) 5 SPECIFICATIONS OF HI 93501 Main features: · · · · · · · HI 762 probes series Available HI 762 accuracy test plugs Range -50 to 150°C Calibration Check feature Remaining battery life indication / low battery detection Auto-off capability Waterproof casing · · · · · · · SPECIFICATIONS OF HI 95502 Main features: LUMBERG® socket for temperature probes LUMBERG® probes series Range -50 to 150°C Calibration Check feature Remaining battery life indication / low battery detection Auto-off capability Waterproof casing SPECIFICATIONS Range -50. 0 to 150. 0°C Resolution 0. 1°C Accuracy ±0. 4°C excluding probe error Typical EMC Deviation ±0. 4°C (with HI 762PWL probe) Battery 3x1. 5V AA (LR6), 2000 hours of continuous use Auto-off user selectable: 8 min, 60 min, disabled Environment -10 to 50°C (14 to 122°F); RH 100% Dimensions 150 x 80 x 36 mm (5. 9 x 3. 1 x 1. 4") Weight 235 g (8. 3 oz. ) 6 SPECIFICATIONS Range -50. 0 to 150. 0°C Resolution 0. 1°C Accuracy ±0. 4°C excluding probe error Typical EMC Dev. ±0. 4°C (with HI 762PW/LUM probe) Battery 3x1. 5V AA (LR6), 2000 hours of continuous use Auto-off user selectable: 8 min, 60 min, disabled Environment -10 to 50°C (14 to 122°F); RH 100% Dimensions 150 x 80 x 36 mm (5. 9 x 3. 1 x 1. 4") Weight 235 g (8. 3 oz. ) 7 SPECIFICATIONS OF HI 93503 Main features: · · · · · · · HI 765 probes series Available HI 765 accuracy test plugs Range -50 to 150°C Calibration Check feature Remaining battery life indication / low battery detection Auto-off capability Waterproof casing · · · · · · SPECIFICATIONS OF HI 935007 Main features: Direct HI 766C K-thermocouple probe Measuring scale selection (°C or °F) Range -50. 0 to 900°C or -58. 0 to 1650°F Remaining battery life indication / low battery detection Auto-off capability Waterproof casing SPECIFICATIONS Range -50. 0 to 150. 0°C Resolution 0. 1°C Accuracy ±0. 4°C excluding probe error Typical EMC Deviation ±0. 4°C (with HI 765PWL probe) Battery 3x1. 5V AA (LR6), 2000 hours of continuous use Auto-off user selectable: 8 min, 60 min, disabled Environment -10 to 50°C (14 to 122°F); RH 100% Dimensions 150 x 80 x 36 mm (5. 9 x 3. 1 x 1. 4") Weight 235 g (8. 3 oz. ) 8 Range SPECIFICATIONS -50. 0 to 199. 9°C / 200 to 900°C -58. 0 to 399. 9°F / 400 to 1650°F Resolution 0. 1°C (up to 199. 9°C) / 1°C (outside) 0. 1°F (up to 399. 9°F) / 1°F (outside) Accuracy (@20°C/68°F) ±0. 2% F. S. excluding probe error Typical EMC Deviation ±3°C / ±6°F Battery 3x1. 5V AA (LR6), 1600 hours of continuous use Auto-off user selectable: 8 min, 60 min, off Environment -10 to 50°C (14 to 122°F); RH 100% Dimensions 150 x 80 x 36 mm (5. 9 x 3. 1 x 1. 4") Weight 300 g (10. 6 oz. ) 9 OPERATIONAL GUIDE Each meter is supplied complete with batteries. Remove the back cover, unwrap the supplied batteries and install them while paying attention to their polarity (see also the "Battery replacement" section for more details). Note: HI 93501, HI 95502, HI 93503 and HI 935007 come with batteries already installed. Reattach the back making sure that the gasket is in place and tighten the 4 screws to ensure a watertight seal. TAKING MEASUREMENTS Connect a suitable temperature probe to the meter (see pages 14-15 for a complete list of Hanna probes). To switch the meter ON, press the ON/OFF button on the front of the meter. If it does not turn on, make sure that the batteries are properly installed in their place. At start-up the thermometer displays all LCD segments for a few seconds, followed by the percentage indication of the remaining battery life; then it enters normal measurement mode. Note: The full display can be frozen by keeping the ON/OFF button pressed. If a temperature probe is plugged in, the meter displays the measured temperature. If no temperature probe is plugged in or the reading is over-range, the display shows blinking dashes. If the reading is slightly beyond the measuring range, the meter flashes the closest full-scale value. To switch the meter OFF, press the ON/OFF key. CALIBRATION CHECK (for HI 93501, HI 95502 and HI 93503) The HI 93501, HI 95502 and HI 93503 models are provided with the Cal-Check feature, which allows the user to check the instrument calibration status at any time. If the meter is calibrated, the display will stabilize and show "0. 0°C" (±0. 3°C) in a few seconds. To return to measurement mode, release the button. Contact your dealer or your nearest Hanna Service Center for recalibration, if necessary. °C/°F SELECTION (HI935007 ONLY) · The meter displays the measured temperature, automatically switching to the resolution suitable for the temperature range; i. e. 0. 1° up to 199. 9°C (399. 9°F), or 1° above. · The user can select the measurement unit by pressing the °C/°F button. AUTO SHUT-OFF (not for HI 9041 and HI9061) To save battery life, HI 93501, HI 95502, HI 93503 and HI 935007 models are provided with an auto-off feature, which switches the instrument off after a certain period of nonuse. The auto-off delay time (default value is 60 minutes) can be changed by the user (8 minutes, 60 minutes, or disabled) with an internal button located in the battery compartment (see figure on page 12). [. . . ] (03) 3258. 9565 · Fax (03) 3258. 9567 Korea: Tel. (02) 2278. 5147 · Fax (02) 2264. 1729 Malaysia: Tel. (603) 5638. 9940 · Fax (603) 5638. 9829 Singapore: Tel. 6296. 7118 · Fax 6291. 6906 South Africa: Tel. [. . . ]