Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HANNA INSTRUMENTS HI 96727. We hope that this HANNA INSTRUMENTS HI 96727 user guide will be useful to you.
Lastmanuals help download the user guide HANNA INSTRUMENTS HI 96727.
Manual abstract: user guide HANNA INSTRUMENTS HI 96727
Detailed instructions for use are in the User's Guide.
[. . . ] Follow the instructions of the measurement procedure for zeroing the meter. Under range: A blinking "0" indicates that the sample absorbs less light than the zero reference. Check the procedure and make sure you use the same cuvette for reference (zero) and measurement. Over Range: A flashing value of the maximum concentration indicates an over range condition. [. . . ] 10·Insert the apparent color cuvette into the instrument and ensure that the notch on the cap is positioned securely into the groove. 11·Press READ/ and the lamp, cuvette and detector icons will appear on the display, depending on the measurement phase. 12·The meter directly displays the value of apparent color. 13·Remove the cuvette, insert the true color cuvette into the instrument and ensure that the notch on the cap is positioned
14·Press READ/ and the lamp, cuvette 14 and detector icons will appear on the display, depending on the measurement 15 phase. 15·The meter directly displays concentration in color units of the true color on the LCD. INTERFERENCES: There are no known interferences for this method.
CALIBRATION
Note: It is possible to interrupt the calibration procedure at any time by pressing CAL CHECK or ON/OFF keys. 1· Turn the meter on by pressing ON/OFF. 2· When the beeper sounds briefly and the LCD displays dashes, the meter is ready. 3· Press and hold CAL CHECK for three seconds to enter calibration mode. The display will show "CAL" during calibration procedure. The blinking "ZERO" asks for instrument zeroing.
Calibration
14·Press GLP/ to edit the desired month (01-12). If the key is kept pressed, the month number is automatically increased. 15·When the correct month has been set, press ZERO/CFM or READ/ to confirm. Now the display will show the day blinking. 16·Press GLP/ to edit the desired day (01-31). If the key is kept pressed, the day number is automatically increased.
14-15 or
Battery management
To save the battery, the instrument shuts down after 10 minutes of non-use in measurement mode and after 1 hour of non-use in calibration mode. If a valid measurement was displayed before auto-shut off, the value is displayed when the instrument is switched on. The blinking "ZERO" means that a new zero has to be performed. One fresh battery lasts for arround 750 measurements, depending on the light level. The remaining battery capacity is evaluated at the instrument startup and after each measurement. The instrument displays a battery indicator with three levels as follows: · 3 lines for 100 % capacity · 2 lines for 66 % capacity · 1 line for 33 % capacity · Battery icon blinking if the capacity is under 10 %. If the battery is empty and accurate measurements can't be taken any more, the instrument shows "dEAd bAtt" and turns off. [. . . ] For yours and the instrument safety do not use or store the instrument in hazardous environments.
VALIDATION
1· Turn the meter on by pressing ON/OFF. 3 2· When the beeper sounds briefly and the LCD displays dashes, the meter is ready. 3· Place the CAL CHECKTM Standard HI 96727-11 Cuvette A into the holder 4-5 and ensure that the notch on the cap is positioned securely into the groove. 4· Press ZERO/CFM and the lamp, cuvette and detector icons will appear on the display, depending on the measurement phase. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS HI 96727
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS HI 96727 will begin.
