Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HARBACH ELECTRONICS SS-100. We hope that this HARBACH ELECTRONICS SS-100 user guide will be useful to you.
Lastmanuals help download the user guide HARBACH ELECTRONICS SS-100.
Manual abstract: user guide HARBACH ELECTRONICS SS-100
Detailed instructions for use are in the User's Guide.
[. . . ] SS-100 UNIVERSAL "SOFT START" INSTALLATION INSTRUCTIONS
PART S SUPPLIED WITH T HIS KIT : (1) SS-100 "S oft Start" Circuit Board Assembly
It is not possible to give exact installation instruc tions for the Universal "Soft Start" module because I ha ve neither the schematic nor the physical layout of your specific am plifier. [. . . ] A RED wire betwe en p ads "C" and "D" (user supplied) is connected to the neutral or return of the input power line. The m odule will be mounted using silicone a dhe sive relay side to the ch assis. The overall o peration is qu ite sim ple. W hen the power switch in turn ed ON , 240 volts is ap plied to the load through a 20 10W resistor in each side of the line. The voltage at the load is measured by the diode connected to pad "A". As the filter capacitors and other components charge or stabilize in current drain, the voltage at pad "A" rises. When this voltage reaches app roximately 90 volts, the two relays are activated, shorting out the 20 resistors. Now the power c ircuit is back to its full power state and the soft start circuit is locked out of operation. [. . . ] However, if the soft start is used with equipm ent running on less than 120 volts, the resistors probably do not need to be changed.
NOTE: If only one side of the input power line is switched, be sure that the switched lead is on the "C to A" side of the soft start circuit.
PARTS LIST
D1 K1 & K2 R1 & R2 (240VAC) R1 & R2 (120 VAC) R3 C1 & C2 1N4005 (1A 600 PIV) SPDT 12A 48VDC 20 10W 10 10W 2400 2W 5% 100µF 63VDC
HARBACH ELECTRONICS Jeff Weinberg W8CQ 468 County Road 620 Polk, OH 44866-9711 (419) 945-2359 http://www. harbachelectronics. com info@harbachelectronics. com
1 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HARBACH ELECTRONICS SS-100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HARBACH ELECTRONICS SS-100 will begin.
