User manual HARMAN KARDON 230A

[. . . ] The 230A is a multipurpose five-disc player, capable of playing both DVD discs and conventional CD audio discs with the highest fidelity. To enable you to get the maximum quality from DVDs, the 230A is equipped with the latest in design techniques, including advanced 10-bit video digital-to-analog connectors (DAC) and component video outputs, to ensure that you get all the quality inherent in today's DVD medium. In addition, Harman Kardon's audio heritage continues into the digital video era with audiophile-grade AKM output DACs to ensure that the audio quality matches the superb video. Of course, both coaxial and optical digital audio outputs are available for direct connection to A/V receivers or processors so that you may take advantage of Dolby Digital* and DTS® soundtracks. [. . . ] Select Other and Press ENTER. Menu Language Defines the language of the menus and other short messages shown on the screen. Press ARROW (UP or DOWN) on the remote to select Menus on the SET UP MENU DISPLAY. Press ENTER or ARROW (right), Menus Menu appears. 2. Input first number of language code (see table on page 33) into the first digit by pressing ARROW (UP or DOWN) on the remote, then ENTER or ARROW (right) and enter the other 3 digits in the same way. The code can also be entered directly with the NUMBER (0~9) keys. Press PLAY to resume normal playback or RETURN to delete Set Up Menu display. Press ARROW (UP or DOWN) on the remote to select specific Menu Language. Press PLAY to resume normal playback or RETURN to delete the Set Up Menu display. 3. Press ARROW (UP or DOWN) on the remote to select specific Subtitle Language. Press PLAY to resume normal playback or RETURN to delete Set Up menu display. I Note that when a default subtitle language is selected, it will be used whenever that language is present on the DVD disc being played. However, when that language is not present, the language used will be the one preprogrammed into the disc itself (typically, that default will be English, but the selection will vary at the discretion of each disc's producer. ) Although the default will set the language that will be used when the disc is first put into play, the language may easily be changed at any time by using the Subtitle Button (see page 25 for more information). 18 SYSTEM SETUP System Setup Rating This chapter is to disable the playing of some DVDs (particulary U. S. When the OK icon is highlighted, press ENTER to finish password input, Confirm Password display appears below the Enter Password Display. I After password is memorized, all password menus are available only after correct password is entered. If incorrect password is entered, new password menu appears where the correct password can be entered again. I Note that the time delay before the password can be re-entered will increase with each attempt. This prevents attempts to find the correct password by trial and error. I It's most important that you note the password in a safe place or remember it reliably as access to rated discs or rating/password menus or changing or clearing the password (see next pages) is not possible without entering the correct password. 6. Press the NUMBER (0~9) buttons on the remote to enter same password for confirmation. 3. Select Set Password, press ENTER, Enter Password Display appears. 7. When incorrect password is entered, new password menu appears and you can enter and confirm the password again. This time, as help the correct password is repeated in each digit of the upper "Try Again" menu and the incorrect password in the lower "Confirm Password" menu, appearing after the upper is passed. After the correct password is entered in all menus, press ENTER, the main password menu will return and a red key symbol appears in the front display. [. . . ] If track is selected, press ENTER or ARROW (right) twice. You also can select track directly by entering its number with NUMBER (0~9) keys (note that a "0" must be entered in front of a single number, depending on the total number of titles on disc), then press ENTER or ARROW (right) twice. When ADD icon is highlighted, press ENTER to add selected track to playlist. You can select maximum 32 Tracks by repeating step 3. [. . . ]