User manual HARMAN KARDON 330A

[. . . ] If there is any other Region Code on a disc, that disc will not play on the DVD. 2 2 TABLE OF CONTENTS Introduction Thank you for choosing the Harman Kardon DVD The 330A bridges the gap between your home theater and the digital world of your PC, PDA, digital camera and other devices. With its memory card and USB ports, the 330A makes it possible to play your digital audio and image files through your home theater system without the clutter of messy wiring or complicated network systems. On top of that, the 330A and DVD 39 are also state-of-the-art optical disc players that can play almost every music, movie and still-image disc in your library with the highest fidelity available today. Along with conventional Video and CD audio discs, the DVD players let you enjoy the latest high-resolution DVD-Audio discs, with HDMITM (High-Definition Multimedia InterfaceTM) output of pure, uncompressed digital audio and video as well as DivX® and VCD discs. [. . . ] Preferred Subtitle Language: Defines your preferred subtitle language. Every time a disc will be played that contains this subtitle language, it will be shown automatically. If you do not find 18 SYSTEM SETUP System Setup your preferred language in the list of options, you can select your preferred language by highlighting OTHER. Press OK and use the Navigation Buttons to select your preferred language from the list shown on the screen. Note that only those languages will be available that are actually on the DVD you would like to play. You can also set the preferred subtitle language to OFF. In that case no subtitles will be shown. Panel Time-Out: Sets the time-out interval for the Front Panel Information Display. After the selected time, the display will dim completely. Status Bar Time-Out: Sets the time-out interval for the Status Bar, after which the Status Bar will disappear from the screen. Parental Control: Defines a password used to control viewing of restricted programs. No audio will be passed to the HDMI Output. PCM Limit: This setting affects playback of highresolution (96kHz or greater) audio materials. If your receiver is capable of handling signals greater than 48kHz, select the No Limit setting. If your receiver is not capable of resolving these signals, or if you aren't sure of your receiver's capabilities, select the 48kHz setting. At the 48kHz setting, high-resolution materials will be downsampled to 48kHz. If you select the No Limit setting when your receiver is not capable of processing high-resolution signals, you will not hear any audio when these materials are played. Note: Due to copyright restrictions, the player will not output an uncompressed signal in the PCM format from a disc recorded with 96kHz/24bit resolution, such as some DTS audio CDs. If the Digital Output setting in the Audio Setup submenu is set to PCM, the player will always output the original DTS 96/24 signal. Changing the PCM Limit setting to 48kHz will have no effect. Dynamic Range: This setting allows you to take advantage of the programming present on some Dolby Digital recordings to reduce the volume of louder passages while maintaining intelligibility of quieter passages. This means that you may listen to programs at a level that allows the full impact of a soundtrack to be heard at a volume that is lower than you might otherwise use to avoid disturbing others. [. . . ] · Clear path to sensor or use optional outboard remote sensor. · Many DVDs are encoded with copy protection to prevent copying to VCR. · Factory default password "1234" always remains active. · Stop play of disc before programming a playlist. [. . . ]