User manual HARMAN KARDON AVR 645

[. . . ] ® Power for the Digital Revolution. ® AVR 645 AUDIO/VIDEO RECEIVER OWNER'S MANUAL AVR 645 AVR 645 AUDIO/VIDEO RECEIVER 3 4 4 5 8 11 15 17 21 21 23 25 25 27 30 30 32 33 36 36 36 37 37 37 39 40 41 41 42 42 42 43 44 44 44 44 44 45 45 46 46 46 47 48 48 49 49 50 51 51 53 55 56 57 59 59 60 64 64 Introduction Important Safety Information Unpacking Front-Panel Controls Rear-Panel Controls Main Remote Control Functions ZR 10 Remote Control Functions Installation and Connections System Configuration Speaker Placement Input Setup Audio Setup Surround Setup Using EzSet/EQ Manual Setup Speaker Size and Crossover Delay Settings Output Level Adjustment Operation Basic Operation Source Selection Volume and Tone Control Surround Mode Selection Digital Audio Playback USB Playback Using The Bridge AM/FM Tuner Operation XM Radio Operation Recording Front-Panel Connections Output Level Trim Adjustment Dim Function Advanced Features Front-Panel Display Fade Display Brightness Turn-On Volume Semi-OSD Settings Full-OSD Time-Out Adjustment DMP/The Bridge Auto Power Multiroom Operation Multiroom Setup Surround Channel Amplifier Assignment Multiroom Operation Configuring the Remote Preprogrammed Code Entry Automatic Code Entry Learning Commands Learning Codes for an Input Selector Changing Devices Macro Programming Punch-Through Configuration Renaming Resetting the Remote Device Priority Timing Troubleshooting Guide Processor Reset Appendix Technical Specifications Trademark Acknowledgements For Canadian model This class B digital apparatus complies with Canadian ICES-003. For models having a power cord with a polarized plug: CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Modèle pour les Canadien Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Sur les modèles dont la fiche est polarisee: ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond. Please register your product on our Web site at www. harmankardon. com. [. . . ] To change one of the individual speaker positions directly, press the Speaker Select Button a, followed by the // ¤ Navigation Button n to select the desired position as that name appears in the on-screen display and the Lower Display Line $. When the name of the speaker position to be adjusted appears press the Set Button p within 5 seconds. Press the </ > Navigation Button n to enter the desired delay setting for that speaker and then press the Set Button p to enter the setting. The // ¤ Navigation Button n may be used to select another position, or you may simply wait 5 seconds for the system to time out and return to normal operation. When all changes to the Delay settings have been made press the // ¤ Navigation Button n© until the cursor is on the BACK TO MANUAL SETUP menu and then pressing the Set Button poe so that you may make any other adjustments to the system parameters. If the changes just made complete the manual adjustments needed, press the OSD Button U to exit the menu system and resume normal system operation. Output Level Adjustment Output level adjustment is a key part of the configuration of any surround sound product. It is particularly important for a digital receiver such as the AVR 645, as correct outputs ensure that you hear soundtracks with the proper directionality and intensity. In most cases, you will not need to make any adjustments to the output level, as the settings made by running EzSet/EQ are as accurate as those made manually. However, you are able to use the CHANNEL ADJUST menu to trim the settings to suit your personal preferences or to configure the system so that the output settings are different from one input source to another. The ability to make individual output level adjustments on a per-input basis is useful for listeners who may prefer different settings for the subwoofer or an individual channel group such as the front speakers when playing musical selections via the CD input as opposed to the movie soundtracks more frequently used with the DVD input. This menu also allows you to adjust the output levels using external sources such as a test disc or other program material that you use as a standard, rather than the system's test tone. IMPORTANT NOTE: Listeners are often confused about the operation of the surround channels. While some assume that sound should always be coming from each speaker, most of the time there will be little or no sound in the surround channels. This is because they are only used when a movie director or sound mixer specifically places sound there to create ambience, a special effect or to continue action from the front of the room to the rear. When the output levels are properly set, it is normal for surround speakers to operate only occasionally. Artificially increasing the volume to the rear speakers may destroy the illusion of an enveloping sound field that duplicates the way you hear sound in a movie theater or concert hall, even when making manual adjustments. Before beginning the output level adjustment process, make certain that all speaker connections have been properly made. The system volume should be set to the level that you will use during a typical listening session. We recommend that EzSet/EQ be used when the AVR is first installed to establish the initial level settings. To make any changes to the channel output settings, go to the CHANNEL ADJUST sub-menu within the MANUAL SETUP menu (Figure 18). To do this, first press the OSD Button U so that the MASTER MENU (Figure 1) appears. [. . . ] Once your system is configured manually, or through the use of EzSet/EQ II, where applicable, we recommend that you use the "Your System Settings" column to record your personal preferences so that they may be restored in the event the AVR's memory is lost due to an extended power outage, system upgrade, processor reset, or other major service to your unit. Additional copies of this worksheet may be downloaded from the Harman Kardon web site at www. harmankardon. com. Worksheet A: Surround Configuration Defaults and Settings Feature Logic 7 Global Default Surround Dolby Pro Logic II Music Center Width Dolby Pro Logic II Music Dimension Dolby Pro Logic II Panorama Dolby Pro Logic IIx Music Center Width Dolby Pro Logic IIx Music Dimension Dolby Pro Logic IIx Panorama Night Mode System Default On Original 3 0 Off 3 0 Off Off Your System Settings APPENDIX 61 APPENDIX System Default and Personal Settings Worksheets Worksheet B: Delay Defaults and Setting Feature Front Left Center Front Right Surround Right Surround Back Right Surround Back Left Surround Left Subwoofer System Default 12 Feet 12 Feet 12 Feet 12 Feet 10 Feet 10 Feet 12 Feet 12 Feet Your System Settings Worksheet C: System Defaults and Settings Feature Front L/R Speaker Size & X-Over Center Speaker Size & X-Over Surround L/R Speaker Size & X-Over Surround Back Speaker Size & X-Over LFE LP Filter Sub Mode Channel Adjust Sub Size VFD Fade Time Out VFD Brightness Volume Default Volume Default Set Semi-OSD Time Out Full-OSD Time Out DMP Auto Power HDMI Video Auto Surround Back Amps Carrier Out System Default Small ­ 100Hz Small ­ 100Hz Small ­ 100Hz None 100Hz Sub Global 10 in/250mm Off Full Off ­25dB 5 Sec 20 Sec Off On Main Zone II Your System Settings 62 APPENDIX WORKSHEET D: INPUT SETTINGS Video 1 Video 2 Video 3 Video 4 HDMI 1 HDMI 2 CD Tape Tuner The Bridge USB 6/8 Ch Direct FEATURE DVD Input Title Surround Mode Audio In Port Audio Auto Poll Video In Port Component Video Input Video Processing A/V Sync Delay Record Output Auto Poll Input Source Type ADC Sampling Tone In/Out Bass Treble APPENDIX APPENDIX 63 AVR 645 TECHNICAL SPECIFICATIONS Audio Section Stereo Mode Continuous Average Power (FTC) 90 Watts per channel, 20Hz­20kHz, @ <0. 07% THD, both channels driven into 8 ohms Seven-Channel Surround Modes Power per Individual Channel Front L&R channels: 75 Watts per channel @ <0. 07% THD, 20Hz­20kHz into 8 ohms Center channel: 75 Watts @ <0. 07% THD, 20Hz­20kHz into 8 ohms Surround (L & R Side, L & R back) channels: 75 Watts per channel @ <0. 07% THD, 20Hz­20kHz into 8 ohms Input Sensitivity/Impedance Linear (High-Level) Signal-to-Noise Ratio (IHF-A) 200mV/47k ohms 100dB AM Tuner Section Frequency Range Signal-to-Noise Ratio Usable Sensitivity Distortion Selectivity Video Section Television Format Input Level/Impedance Output Level/Impedance Video Frequency Response (Composite and S-Video) Video Frequency Response (Component Video) HDMI General Power Requirement Power Consumption Dimensions Width Height Depth Weight 520­1720kHz 45dB Loop 500µV 1kHz, 50% Mod 0. 8% ±10kHz, 30dB NTSC 1V p-p/75 ohms 1V p-p/75 ohms 10Hz­8MHz (­3dB) 10Hz­100MHz (­3dB) Version 1. 1 AC 120V/60Hz 120W at Power On, idle; 1, 272W at rated power output (7 channels driven) Product 17-5/16 inches (440mm) 6-1/2 inches (165mm) 17-1/16 inches (435mm) 41 lb (18. 6kg) Shipping 20-1/16 inches (510mm) 10 inches (254mm) 22-3/16 inches (565mm) 48 lb (21. 8kg) Surround System Adjacent Channel Separation Dolby Pro Logic 40dB Dolby Digital DTS Frequency Response @ 1W (+0dB, ­3dB) High Instantaneous Current Capability (HCC) Transient Intermodulation Distortion (TIM) Slew Rate FM Tuner Section Frequency Range Usable Sensitivity Signal-to-Noise Ratio Distortion Stereo Separation Selectivity Image Rejection IF Rejection 55dB 55dB 10Hz ­130kHz ±50 Amps Unmeasurable 40V/µsec 87. 5­108. 0MHz IHF 1. 3µV/13. 2dBf Mono/Stereo 70/68dB Mono/Stereo 0. 2/0. 3% 40dB @ 1kHz ±400kHz, 70dB 80dB 90dB Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis. [. . . ]