User manual HARMAN KARDON BDS 2 SO

[. . . ] BDS Integrated home theater system Owner's Manual BDS VERIFY LINE VOLTAGE BEFORE USING UNPACKING INSTALLATION LOCATION CLEANING MOVING THE RECEIVER INTRODUCTION SYSTEM COMPONENTS SUPPLIED ACCESSORIES RECEIVER FRONT-PANEL CONTROLS RECEIVER REAR-PANEL CONNECTIONS SUBWOOFER CONTROLS AND CONNECTIONS REMOTE CONTROL FUNCTIONS PLACING THE SPEAKERS (BDS 800, BDS 700, BDS 400 AND BDS 300 SYSTEMS) PLACING THE SPEAKERS (BDS 600 SYSTEM) MOUNTING OPTIONS FOR SATELLITE AND CENTER SPEAKERS CONNECTIONS PREPARING THE REMOTE CONTROL SETTING UP THE RECEIVER USING THE RECEIVER USING THE DISC PLAYER LISTENING TO YOUR iPod/iPhone USING THE RADIO LISTENING TO AUDIO SOURCES PLAYING FILES FROM USB DEVICES AND CD DATA DISCS USING PLAYLISTS TROUBLESHOOTING AUX COMPONENT REMOTE-CONTROL CODE LIST SPECIFICATIONS 3 3 3 3 3 3 4 4 5 6 7 8 10 11 11 14 18 19 22 23 25 26 26 26 28 29 30 35 Table of Contents 2 BDS Introduction Verify Line Voltage Before Using, Unpacking, Installation Location, Cleaning, Moving the Receiver and Introduction Please register your product on our Web site at www. harmankardon. com. Note: You'll need the product's serial number. At the same time, you can choose to be notified about our new products and/or special promotions. Thank You for Choosing harman kardon® Products! In the years since harman kardon engineers invented the high-fidelity receiver, we have taken to heart this philosophy: Bringing the joy of home entertainment to as many people as possible, adding performance and ease-of-use features that enhance the experience. The BDS series of home entertainment systems offers a complete home entertainment solution with a wealth of listening and viewing options in one sleek receiver. [. . . ] NOTE: If the Aux button's LED goes out at any time, you will need to begin again from Step 2. BDS Programming Remote Control "Punch-Through" Commands After programming the remote to control an auxiliary (Aux) component, you can also program it so it will control the Aux component's channel up/down and transport functions (Play, Pause, etc. ) even when the remote is not in the Aux-control mode. For example, if the remote is programmed to operate your TV in the Aux control mode, you can also have the TV's channel +/­ functions "punch through" and operate even when the remote is in the Disc, Radio or iPod control modes. Press and hold the button for the main device the remote will be operating. The button will light up, go dark and then light up again. Select the type of punch-through programming. a) For "punch-through" channel control, press the Channel Up button. b) For "punch-through" transport control, press the Play button. The original source button will flash to confirm. You can repeat Step 1 ­ Step 3 for any of the remote's source-selector buttons (Aux, Radio etc. ). NOTE: "Punch-through" channel and transport commands will override the existing commands for those buttons in the source modes you program. To undo "punch-through" programming, follow the same steps as above, but press the same source selector button in Step 1 and Step 3. Preparing the Remote Control and Setting Up the Receiver Before you can use your BDS system, you need to set the language and make a few basic settings so that the BDS receiver's video output will work properly with your TV. Press the OK button and the Wizard's language screen will appear. Setup Wizard Page: 2/5 Please select which language you would like the BDS menus to appear. English Español Français Deutsch Italiano Previous OK Next After setting the language you want the on-screen menus to appear in, press the OK button and the Wizard's TV-resolution screen will appear. Setup Wizard Page: 3/5 Using the Remote After it is Programmed Pressing the remote's Aux source-selector button will put the remote into the auxiliarycontrol mode, and it will control the auxiliary component(s) via the codes you have programmed into it. To switch the remote back to the BDS receiver-control mode from the auxiliary-control mode, press any one of these buttons: Disc, Radio, iPod or Home. Please select the highest resolution that your TV supports. Upon making a selection the screen will be changed to the chosen resolution. You will be presented with the option to continue with the new resolution or `Cancel' to return to the previous resolution. If the screen remains blank, please wait 15 seconds without pressing anything and the system will automatically return to the previous resolution. Auto 480p/576p 720p 1080i 1080p Setting Up the Receiver NOTE: The menu screens shown in this manual are for illustrative purposes and may differ somewhat from the actual displays. To set up your BDS system, you will use the remote to navigate through all of the onscreen menus and to make selections from them. Use the Cursor Up/Down buttons to navigate through the menu list. When an item is highlighted, a white border will appear around it. To select a highlighted item, press the OK button. The screen will change depending on your selection. To return to the previous screen, press the Exit button. Previous OK Next After selecting your TV's highest resolution, press the OK button, and the Wizard's aspectratio screen will appear. [. . . ] © 2010 HARMAN International Industries, Incorporated. 6, 327, 372 and 6, 404, 897) are trademarks of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Blu-ray Disc and BD-Live are trademarks of the Blu-ray Disc Association. DivX®, DivX Certified® and associated logos are registered trademarks of DivX, Inc. , and are used under license. [. . . ]