User manual HARMAN KARDON BDS 700

[. . . ] Integrated home theater system Owner's Manual ENGLISH BDS BDS INTRODUCTION VERIFY LINE VOLTAGE BEFORE USING UNPACKING INSTALLATION LOCATION CLEANING MOVING THE RECEIVER SYSTEM COMPONENTS SUPPLIED ACCESSORIES RECEIVER FRONTPANEL CONTROLS RECEIVER REARPANEL CONNECTIONS SUBWOOFER CONTROLS AND CONNECTIONS REMOTE CONTROL FUNCTIONS PLACING THE SPEAKERS BDS 800, BDS 700, BDS 400 AND BDS 300 SYSTEMS PLACING THE SPEAKERS BDS 600 SYSTEM MOUNTING OPTIONS FOR SATELLITE AND CENTER SPEAKERS CONNECTIONS PREPARING THE REMOTE CONTROL SETTING UP THE RECEIVER USING THE RECEIVER USING THE DISC PLAYER LISTENING TO YOUR IPOD/IPHONE USING THE RADIO LISTENING TO AUDIO SOURCES PLAYING FILES FROM USB DEVICES AND CD DATA DISCS USING PLAYLISTS TROUBLESHOOTING AUX COMPONENT REMOTECONTROL CODE LIST SPECIFICATIONS 3 3 3 3 3 3 4 4 5 6 7 8 10 11 11 14 18 19 23 24 26 26 27 27 29 30 31 36 Table of Contents 2 BDS Introduction Please register your product on our Web site at www. harmankardon. com. Verify Line Voltage Before Using, Unpacking, Installation Location, Cleaning, Moving the Receiver and Introduction Note: You'll need the product's serial number. At the same time, you can choose to be notified about our new products and/or special promotions. Thank You for Choosing Harman Kardon® Products! In the years since harman kardon engineers invented the high-fidelity receiver, we have taken to heart this philosophy: Bringing the joy of home entertainment to as many people as possible, adding performance and ease-of-use features that enhance the experience. The BDS series of home entertainment systems offers a complete home entertainment solution with a wealth of listening and viewing options in one sleek receiver. Each BDS series system also includes a 5. 1-channel, 2. 1-channel or soundbar loudspeaker system, a system remote control and all the cables and accessories you need to enjoy movies and music in your own home, when you use them with your television or video display. [. . . ] Press the button on the other remote that you want to "teach" to the BDS receiver remote. When the IR code has been received and stored, the Aux button's LED will flash three times, and the BDS receiver remote will remain in the learning mode, ready to learn another code. If no IR code is received within 20 seconds, the Aux LED will flash rapidly several times, and the remote will exit the learning mode. To resume programming, return to Step 2. Repeat Step 3 and Step 4 for each command you want to teach the BDS receiver remote. NOTE: If the Aux button's LED goes out at any time, you will need to begin again from Step 2. Programming Remote Control "Punch-Through" Commands After programming the remote to control an auxiliary (Aux) component, you can also program it so it will control the Aux component's channel up/down and transport functions (Play, Pause, etc. ) even when the remote is not in the Aux-control mode. For example, if the 18 BDS remote is programmed to operate your TV in the Aux control mode, you can also have the TV's channel +/­ functions "punch through" and operate even when the remote is in the Disc, Radio or iPod control modes. Press and hold the button for the main device the remote will be operating. The button will light up, go dark and then light up again. Select the type of punch-through programming. a) For "punch-through" channel control, press the Channel Up button. b) For "punch-through" transport control, press the Play button. The original source button will flash to confirm. You can repeat Step 1 ­ Step 3 for any of the remote's source-selector buttons (Aux, Radio etc. ). NOTE: "Punch-through" channel and transport commands will override the existing commands for those buttons in the source modes you program. To undo "punch-through" programming, follow the same steps as above, but press the same source selector button in Step 1 and Step 3. Previous Preparing the Remote Control and Setting Up the Receiver Please select which language you would like the BDS menus to appear. English Español Français Deutsch Italiano OK Next After setting the language you want the on-screen menus to use, press the OK button, and the Wizard's TV-resolution screen will appear. Setup Wizard Page: 3/5 Using the Remote After it is Programmed Pressing the remote's Aux source-selector button will put the remote into the auxiliarycontrol mode, and it will control the auxiliary component(s) via the codes you have programmed into it. To switch the remote back to the BDS receiver-control mode from the auxiliary-control mode, press any one of these buttons: Disc, Radio, iPod or Home. Please select the highest resolution that your TV supports. Upon making a selection the screen will be changed to the chosen resolution. You will be presented with the option to continue with the new resolution or `Cancel' to return to the previous resolution. If the screen remains blank, please wait 15 seconds without pressing anything and the system will automatically return to the previous resolution. Auto 480p/576p 720p 1080i 1080p Setting Up the Receiver NOTE: The menu screens shown in this manual are for illustrative purposes and may differ somewhat from the actual displays. To set up your BDS system, you will use the remote to navigate through all of the on-screen menus and make selections from them. Use the Cursor Up/Down buttons to navigate through the menu list. [. . . ] © 2010 Harman International Industries, Incorporated. Features, specifications and appearance are subject to change without notice. 6, 327, 372 and 6, 404, 897) are trademarks of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Blu-ray Disc and BD-Live are trademarks of the Blu-ray Disc Association. [. . . ]