User manual HARMAN KARDON CD101

[. . . ] WHEN THIS DVD/CD PLAYER IS PLUGGED IN TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INSIDE THIS PLAYER Dear Customers May we take this opportunity to thank you for purchasing this DVD/CD player. We strongly recommend that you carefully study the Operating Instructions before attempting to operate the unit and that you note the listed precautions. The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and retain this booklet as a permanent record of your purchase to aid identification in the event of theft. MODEL NUMBER SERIAL NUMBER 2 Features DVD: a completely new dimension in video entertainment · Subtitles may be displayed in one of a maximum of 32 languages*. · The multi-angle function allows you to choose the viewing angle of scenes which were shot from a number of different angles (Limited to DVD recorded with multiple camera angles. ) · Advanced sophisticated 10-bit MPEG-2 video decoding circuits. [. . . ] While a disc is playing, press REPEAT on the remote (the Repeat Display appears). Random Play 1. While a disc is playing, press RANDOM on the remote (the Random Display appears). 2. Each time you press RANDOM on the remote, Random play will turn on or off. To make the Banner Display disappear from the screen, press the CLEAR or STATUS on the remote or wait a few seconds. Note : · If you want to cancel Random while a disc is RANDOM playing, press RANDOM on the remote again (Standard Play Display appears). 2. Access menus in the following order by pressing REPEAT on the remote repeatedly until the desired function is displayed . REPEAT DISC > REPEAT TITLE > REPEAT CHAPTER > REPEAT OFF 3. To make the menu disappear from the screen, press the CLEAR or STATUS on the remote or wait some seconds. While a disc is playing, press A-B on the remote when you want to choose a scene as the beginning point (the Repeat A-B Display appears). 2. Press A-B again to choose a scene as the end point (Repeat A-B setting is done). A-B section will be played continuously. Stop Program Play Program Play will be stop: 1. Then the red PROG indicator will disappear from display and the player will resume normal play mode, but the program will remain in memory and can be recalled by pressing PROGRAM again. Note: · When you finish adding values to Playlist and want to return to normal play mode, press RETURN or select DONE icon and press ENTER on the remote. · While a disc is playing, press PROGRAM on the remote to start Program Play. 19 Playing DVD Discs Set Up Menu During STOP mode, if you press MENU on the remote, current Set Up Menu Display appears on the screen. Select Other and Press ENTER. Audio Language Select Audio Language This step will define the default audio language (if disc was created with different language tracks). Choosing an audio language from the Banner Display (see page 9) will overwrite this setting only temporarily. Press ARROW (UP or DOWN) on the remote to select Audio on the SET UP MENU DISPLAY. Press ENTER or ARROW (right) , AUDIO MENU appears. 2. Input first number of language code (see table on page 32) into the first digit by pressing ARROW (UP or DOWN) on the remote, then ENTER or ARROW (right) and enter the other 3 digits the same way. The code can also be entered directly with the NUMBER (0~9) keys. Press PLAY to resume normal playback or RETURN to delete Set Up Menu display. [. . . ] If track is selected, press ENTER or ARROW (right) twice. You also can select track directly by entering its number with NUMBER (0~9) keys (note that a "0" must be entered in front of a single number, depending on the total number of titles on disc), then press ENTER or ARROW (right) once. When ADD icon is highlighted, press ENTER to add selected track to playlist. You can select maximum 32 Tracks by repeating step 2. [. . . ]