User manual HARMAN KARDON CD191

[. . . ] If there is any other Region Code on a disc, that disc will not play on the DVD. 2 2 TABLE OF CONTENTS Introduction Thank you for choosing the Harman Kardon CD191 The CD191 Digital Media Center bridges the gap between your home theater and the digital world of your PC, PDA, digital camera and other devices. With its memory card and USB ports, the CD191 makes it possible to play your digital audio and image files through your home theater system without the clutter of messy wiring or complicated network systems. And the CD191 is capable of recording CDs, or any analog audio, as MP3 files for storage on a card or USB drive. You can easily preserve your vinyl collection as audiophile-quality MP3 files, simply by connecting your turntable with phono preamp to the CD191's analog audio inputs. [. . . ] Follow the explanations on the screen to set a new password. Disc Recognition: This setting controls the Disc Recognition feature. When turned on, it allows you to pause a DVD, remove it from the player, play another disc, and then resume playback of the original disc at a later time from the point at which you paused. Note that even when the setting is activated, you must pause playback, rather than bring it to a full stop, and the unit must not be turned off between discs. The CD191 is capable of storing the information for up to five DVDs at a time. Screen Saver: Activates a Screen Saver to prevent an image to "burn" into a video display device. If you connect the CD191 to a LCD or plasma screen or video projector, we recommend you activate the screen saver at all times. Show Angle Icon: Determines whether the Angle Icon will appear on the screen when there are different angles available on a DVD disc. Closed Caption: This setting enables viewing of closed caption messages, if they have been encoded in the video material. Closed captions are text displays of the program's dialogue, normally hidden from view, that are made available for the hearing-impaired or others. Auto Play: Change this setting to On to have the CD191 play any loaded disc automatically when it is turned on. Follow the explanations in the Instruction Line on the bottom of your screen to change the settings. In case the audio settings have been changed, they will take effect after the next time the player goes through STOP mode. Preferred Audio Language: Defines your preferred audio language. Every time a disc is played that contains this audio language, it will be activated automatically. If you do not find your preferred language in the list of options, you can select your preferred language by highlighting OTHER. Press ENTER and use the Navigation Buttons to select your preferred language from the list shown on the screen. Note that only those languages will be available that are actually on the DVD you would like to play. Digital Output: If your system includes 5. 1 digital audio surround decoding (Dolby Digital and/or DTS), select BITSTREAM as the digital output. In that case all audio signals will be output with their original format. If your system only includes stereo and/or Dolby Pro Logic, select PCM. Then all audio signals will be output in PCM format only (DTS will output no signal). [. . . ] · Clear path to sensor or use optional outboard remote sensor. · Many DVDs are encoded with copy protection to prevent copying to VCR. · Factory default password "1234" always remains active. · Stop play of disc before programming a playlist. [. . . ]