User manual HARMAN KARDON CD291

[. . . ] Whether the text appears in all uppercase or upper- and lowercase characters, performance and operation remain the same. 31 34 34 34 2 TABLE OF CONTENTS Introduction Thank you for choosing Harman Kardon!With the purchase of a Harman Kardon Digital Lounge system you are about to begin many years of listening enjoyment. Designed to provide all the excitement and detail of movie soundtracks, every nuance of musical selections and crystal clear video playback, the Digital Lounge system is truly a complete audio/video system for the new millennium. The Digital Lounge system has been engineered so that it is easy to take advantage of all the power of its digital technology. [. . . ] Follow the instructions on page 28 should you wish to make changes to the order of the presets or would like to delete presets from the list. Figure 2g Pre-set Station: Selects a new preset station number. Should you wish to change this position, press the Enter Button 6 once the line is highlighted. The blue bar will disappear and the rest of the settings will fade out. Select the requested position by pressing the N or M Buttons 9 until it is shown. Type: Selects whether you would like to search for Channels or S-Channels (Special Channels, Cable channels). Should you wish to change the channel type, press the Enter Button 6 once it is highlighted. The blue bar will disappear and the rest of the settings will fade out. Select the requested type from the list by pressing the N or M Buttons 9. The next steps depend on which information about the TV station to add you have on hand. Depending on whether you have the correct channel number or the correct frequency, follow one of the two steps described below. Channel: Assigns the TV station's channel number. Once the TV channel is on its new position, press the Enter Button 6 to confirm the new position. All stations after the new position will automatically move one station down the list. Stations can also be deleted from the channel list. In order to delete a channel from the list, select it first by moving the cursor until it is highlighted by the blue bar. Press the Green Button O to delete the station from the list. Figure 2i Set Up The DVD Set Up Menu permits changes to Film Mode, Overscan and Interlaced Mode. Film Mode: This mode allows you to switch the Film Mode on or off. When switched to On, this setting will activate the correct film mode detection. The Film Mode should be switched on for all inputs that are used to watch movie playback. If you are not watching movies on a specific video input, the Film Mode setting should be set to Off. Should you wish to change the film mode, press the Enter Button 6 once the line is highlighted. The blue bar will disappear and the rest of the screen will fade out. [. . . ] Multilingual function Several languages for the sound or subtitles in a picture are recorded on some DVDs. Parental Control A function of some (particulary US) DVD's to limit playback of the disc by the age of the users. The limitation varies from disc to disc. When it is activated, playback is completely prohibited, violent scenes are skipped or replaced with other scenes and so on. [. . . ]