User manual HARMAN KARDON CITATION 16A

[. . . ] *Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the Double-D symbol are trademarks of Dolby Laboratories, Inc. ©1992­1999 Dolby Laboratories, Inc. "DTS" and "DTS Neo:6" are registered trademarks of DTS, Inc. [. . . ] (See page 28 for more information on RDS). C Surround Mode Selector: Press this button to select from among the available surround mode options for the mode group selected. The specific modes will vary based on the number of speakers available, the mode group and if the input source is digital or analog. For example, press the Surround Mode Group Selector 6 to select a mode grouping such as Dolby or Logic 7, and then press this button to see the mode choices available. For more information on mode selection, see page 21. D Surround Mode Indicators: Indicator will illuminate in front of the surround mode that is currently in use. E Remote Sensor Window: The sensor behind this window receives infrared signals from the remote control. Aim the remote at this area and do not block or cover it unless an external remote sensor is installed. F Main Information Display: This display delivers messages and status indications to help you operate the receiver. G Digital Coax 3 Input: This jack is normally used for connection to the output of portable digital audio devices, video game consoles or other products that have a coax digital jack. H Video 3 Input Jacks: These audio/video jacks may be used for temporary connection to video games or portable audio/video products such as camcorders and portable audio players. F Video 1 Component Video Inputs: Connect the Y/Pr/Pb component video outputs of a DVD player to these jacks. Note: All component inputs/outputs can be used for RGB signals too, in the same way as described for the Y/Pr/Pb signals, then connected to the jacks with the corresponding color. RGB connection is not possible if the source outputs a separate sync signal (see page 13). G AC Power Cord: Connect the AC plug to an unswitched AC wall output. H DVD Video Inputs: Connect these jacks to the composite or S-Video output jacks on a DVD player or other video source. I Video 1 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jack on a VCR. J Video 2 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source. K Video 2 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a second VCR or other video source. L Optical Digital Inputs: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal or a standard PCM digital source. M Video 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source. [. . . ] The two Hall modes create sound fields that resemble a small (HALL 1) or medium sized (HALL 2) concert hall, with stereo and even pure mono sources. No surround channels DDOLBY PRO LOGIC II MOVIE MUSIC DOLBY PRO LOGIC Logic 7 Cinema Logic 7 Music Logic 7 Enhance DTS 96/24 DOLBY 3 STEREO THEATER Delay time not adjustable HALL 1 HALL 2 Delay time not adjustable 22 OPERATION Operation Surround Mode Chart MODE 5-Channel Stereo FEATURES This mode takes advantage of multiple speakers to place a stereo signal at both the front and back of a room. Ideal for playing music in situations such as a party, it places the same signal at the front-left and surround-left, and at the front-right and surround-right speakers. The center channel is fed a summed mono mix of the in-phase material of the left and right channels. [. . . ]