User manual HARMAN KARDON DC5300

[. . . ] Touching wires can cause a short circuit that can damage your receiver or amplifier. IMPORTANT: Make sure the (+) and (­) bare wires do not touch each other or the other terminal. Touching wires can cause a short circuit that can damage the receiver. 3 BDS Connect the Speakers (Continued) Subwoofer Connection IMPORTANT: Do not plug the subwoofer's AC power cord into an AC outlet at this time. Connections Connect a TV or Video Display TV HDMI Cable LFE Cable Connect to a Local Area Network (LAN)* To Internet Connect Other Devices Connect the Radio Antenna CAT-5/5E Network Modem * Needed only for BD-LiveTM functionality FM Antenna 4 BDS Connections Connect Audio Sources Connect the AC Power Receiver TV To Optical Out -OR- To Audio Out 110V ­ 240V, 50Hz/60Hz Tape Deck To Play Out Subwoofer Cable/Satellite Turner To Optical Out PL0004-01001 Digital Audio Source To Coaxial Out USA: 120V, 60Hz EU: 220V ­ 230V, 50Hz/60Hz 5 ENGLISH BDS Set Up the Receiver Install the Batteries in the Remote Control EJECT POWER TV Receiver Setup To set up your BDS receiver you will use the remote to navigate through the on-screen menus and to make selections from them. DISC RADIO REPEAT iPOD A-B AUX DISPLAY Settings Button SETTINGS 1 2 5 8 0 SURROUND 3 6 9 FIND 4 7 CLEAR Home Button OK Button Exit Button HOME OPTIONS OK Cursor Controls POP-UP EXIT TOP MENU + VOLUME + MUTE CHANNEL ­ PROGRA M ­ BOOKMARK THUMBNAIL ZOOM · Set Up the Receiver Set the receiver's and subwoofer's Main Power switches in the "On" position. Use the Cursor Up/Down buttons to navigate through the menu list. When an item is highlighted, a blue border will appear around it. [. . . ] When an item is highlighted, a blue border will appear around it. To select a highlighted item, press the OK button. The screen will change depending on your selection. To return to the previous screen, press the Exit button. · · Receiver Subwoofer PL0004-01001 Main Power Switch Main Power Switch 6 BDS Setup Wizard When you turn your BDS receiver on for the first time, the on-screen menu will display the Setup Wizard. Setup Wizard and Soundbar System Setup NOTE: These instructions apply only to BDS soundbar systems. Before you can use your soundbar system, you must configure the receiver for 3. 1-channel operation. Press the remote's Settings button. The General Settings screen will appear. Before you can use your BDS system you need to set the language and make a few basic settings so that the BDS receiver's video output will work properly with your TV. Press the OK button and the Wizard's language screen will appear. Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Blu-ray Disc and BD-Live are trademarks of the Blu-ray Disc Association. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Patent #'s: 5, 451, 942; 5, 956, 674; 5, 974, 380; 5, 978, 762; 6, 487, 535 & other U. S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. [. . . ] and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. [. . . ]