User manual HARMAN KARDON DVD 22

[. . . ] ® Power for the Digital Revolution. ® DVD 22 DVD VIDEO PLAYER OWNER'S MANUAL DVD 22 JPEG VCD DVD WMA Play Pause Stop ±<< MP3 ± >>> <<< PROG RANDOM REPEAT 1 ALL TITLE TRACK CHAPTER A-B PBC V. SEC Skip/Search >>± Dimmer Open/Close DVD 22 3 4 5 6 7 8 9 11 12 12 13 14 15 16 17 17 18 18 18 19 20 21 22 23 23 23 23 24 24 24 24 24 24 24 25 25 25 26 26 27 28 28 28 30 31 32 DVD PLAYER Introduction Safety Information Features & DVD Compatibility DVD Terminology Front-Panel Controls Front-Panel Information Display Remote Control Functions Rear-Panel Connections Setup and Connections Connecting to a TV and Analog Receiver Audio Connections Video Display Connections Remote Control Operation Digital Audio Connections System Setup Menus and Navigation Setup Menu System Setup Menu Audio Setup Menu Video Setup Menu Video Adjustments Menu Test Screen Playback Basics for All Formats DVD Playback Using a DVD's Menu Zoom Feature Playback Resume Feature Playing DVDs and CDs Using the On-Screen Status Display Selecting a Title Selecting a Chapter Selecting a Track Changing the Time Display Selecting the Audio Track Selecting or Changing the Subtitle Selecting an Angle Information Display MP3, Windows Media and JPEG Playback Slide Shows VCD Playback Using the Player Menu Disc Info Menu Programmed Playback DVD Language Codes Troubleshooting Guide Technical Specifications Typographical Conventions In order to help you use this manual with the remote control, front-panel controls and rear-panel connections, certain conventions have been used. EXAMPLE ­ (bold type) indicates a specific remote control or front-panel button or indicator, or rear-panel connection jack EXAMPLE ­ (OCR type) indicates a message that is visible on the front-panel information display 1 ­ (number in a square) indicates a specific front-panel control a ­ (number in an oval) indicates a button or indicator on the remote control ¡ ­ (number in a circle) indicates a rear-panel connection A ­ (letter in a square) indicates an indicator in the front-panel information display å ­ (letter in a circle) indicates a section of an on-screen display 2 TABLE OF CONTENTS INTRODUCTION Thank you for choosing the Harman Kardon® DVD 22. The DVD 22 is a state-of-the-art DVD player that combines the best of music, movies and still image reproduction in one, compact, slim-line product. [. . . ] If you do not find your preferred language in the list of options, you may select a preferred language by first pressing the /¤ Navigation Buttons e during the setting adjust- 18 SYSTEM SETUP SYSTEM SETUP of your equipment's capabilities, select the 48kHz option. The DVD 22 will down-sample any program material with higher sample rates so that it is compatible with your equipment. · If your receiver or processor is capable of handling digital signals up to 96kHz, select that option. The DVD 22 will down-sample any program material with higher sample rates so that it is compatible with your equipment. · If your receiver or processor is capable of handling digital signals up to 192kHz, select the No Limit option. In this case all signals will be passed through at their native rates without down-sampling. If you are unsure of the capabilities of your receiver or processor, we suggest that you start with the 96kHz option. If you select this setting and do not hear any audio when a high-resolution disc is played, change the setting to 48kHz so that the audio will be properly downsampled. Dynamic Range: This setting allows you to take advantage of the programming present on some Dolby Digital recordings to reduce the volume of louder, peak passages while maintaining intelligibility of quieter passages. This means that you may listen to programs at a level that allows the full impact of a soundtrack to be heard at a volume that is lower than you might otherwise use to avoid complaints about loud volume levels. The DVD 22 accomplishes this by compressing the audio to a greater or lesser degree, depending on which setting you choose. Three options are available: · MINIMUM does not make any changes to the original playback, and should be used when the volume setting in the listening room may be as loud as you desire. · MEDIUM applies a moderate amount of compression so that louder passages are a little bit quieter. · MAXIMUM applies more compression so that louder passages are much softer. Feel free to experiment with the settings at any time. Note that if your receiver or processor also allows you to program the dynamic range setting, also known as the "Night Mode, " you do not need to make any adjustments on the DVD 22 and should leave the setting at MINIMUM. use the /¤< > Navigation Buttons e until the VIDEO SETUP menu is highlighted within a white outline and press the Enter Button z again. Finally, press the /¤ Navigation Buttons e once more to move the highlight to the Control Settings ç side of the menu screen. The following adjustments are available on the Audio Setup menu: Preferred Audio Language: This setting is used to select the default language that will be used for program playback. The factory default setting is English, but you may choose French, Spanish, German or Italian by making a selection on the Adjustment Options É line. To select a language other than those shown, select OTHER from the choices on the Adjustment Options É line and press the Enter Button z. Then, use the Numeric Keys p to enter the four-digit code listed on page 30 for the desired language. This selects a preferred audio program language, but it will only be available when the disc being played contains that language. [. . . ] · Check to see that disc is CD, CD-R, CD-RW, VCD, MP3-CD, DVD-R and DVD-RW (standard conforming) or DVD-Movie; other types will not play. · Enter password to override or change rating settings (see page 18). · Check input selection of TV or receiver. · Use Progressive Scan mode only with compatible TV. [. . . ]