User manual HARMAN KARDON DVD 29

[. . . ] DVD 29 Digital Versatile Disc Player OWNER'S MANUAL ENGLISH Table of Contents 3 3 5 6 7 8 10 11 11 12 13 14 15 15 15 15 16 16 16 17 17 18 19 20 20 20 21 21 21 22 24 26 27 Introduction Terminology Features, Packing List Front Panel Controls Front Panel Information Display Remote Control Rear Panel Connections Setup and Connections Connecting to a TV Only to a Dolby Digital/DTS Amplifier/Receiver Remote Control Digital Audio Connections Playback Basics Basic Play Playback Features About DivX Movie Files System Set-up System Defaults Set Up Menu System Settings Audio Settings Audio Adjustments Submenu Video Settings Test Screen Test Screen TV Picture Adjustment Player Menu Using the Player Information Menu Using the On-Screen Status Display Declaration of Conformity We, Harman Consumer Group, Inc. 2, Route de Tours 72500 Château-du-Loir, FRANCE declare in own responsibility, that the product described in this owner's manual is in compliance with technical standards: EN 55013:2001 EN 55020:2002 EN 61000-3-2:2000 EN 61000-3-3:1995+A1:2001 EN 60065:2002 Jurjen Amsterdam Harman Consumer Group, Inc. 07/07 CD Playback MP3, Windows Media and JPEG Playback Troubleshooting Guide Specifications NOTE: This player is designed and manufactured for compatibility with Region Management Information that is encoded on most DVD discs. This player is designed only for playback of discs with Region Code 2, or for discs that do not contain Region Code information. [. . . ] To change a setting, simply move the cursor to the setting you wish to change. This setting will be highlighted in light blue, and a brief explanation will appear in the Instruction Line on the bottom of your screen. Next, press the Enter Button 6 and a dropdown menu will appear that contains the available options for that setting. Press the KL Navigation Buttons 9 until the desired option is highlighted, then press the Enter Button 6 to select that option. A Main Menu Line B Submenus C Actual Settings D Instruction Line Set Up Menu The first step in checking or changing the system defaults is to access the Setup Menu. First, make certain that the DVD is properly connected to a video display, and that power is connected. For this process, however, you do not need to load any discs into the unit. During STOP, PAUSE or PLAY mode, if you press SETUP on the remote, the Set Up Menu appears on the screen. This Main Menu and all menus in the following section may look different, listing the settings with different languages, depending on the settings made previously. With the factory default setting all languages are set to "English", that´s why with all menus the English version is shown in the manual. In the SET-UP Menu you will find submenus for making or changing all settings and adjustments for both Audio and Video handling of your DVD 29. Most DVDs are created to allow setup menus to be displayed while the disc is playing, superimposed over the video playback. However, some discs are authored in a way that does not allow this. If you see the icon displayed on the screen after pressing the Setup Button 8 or the Info Button A, press the Stop Button I and then press the Setup or Info Button 8A again. 16 SYSTEM SETUP System Setup System Settings playback of the original disc at a later time from the point at which you paused. Note that even when the setting is activated, you must pause playback, rather than bring it to a full stop, and the unit must not be turned off between discs. The DVD 29 is capable of storing the information for up to five DVDs at a time. PBC Support: Activates PBC (Play Back Control) Support for VCD discs. Screen Saver: Activates a Screen Saver to prevent an image to "burn" into a video display device. If you connect the DVD 29 to a LCD or plasma screen or video projector, we recommend you activate the screen saver at all times. Show Angle Icon: Determines whether the Angle Icon will appear on the screen when there are different angles available on a DVD disc. Closed Caption: This setting enables viewing of closed caption messages, if they have been encoded in the video material. Closed captions are text displays of the program's dialogue, normally hidden from view, that are made available for the hearing-impaired or others. Select the O N setting to activate the DVD 29's closed captioning decoder so that these messages may be viewed. [. . . ] · It is a normal artifact of DVD playback for pictures to jump or show some distortion during rapid play. · With most discs, some functions are not permitted at certain times (e. g. , Track Skip) or at all (e. g. , direct audio track selection). · Change the display language selection. · Certain functions may be disabled by the DVD itself during passages of a disc. [. . . ]