User manual HARMAN KARDON HS 200

[. . . ] HS 200 Home Cinema System OWNER'S MANUAL ENGLISH Table of Contents Page 3 Introduction 4 Safety Information 4 Unpacking 5 Terminology 6 Features 7 Front Panel Controls 8 Front Panel Display 9 Rear Panel Connections 11 Remote Control 13 Basic Information 13 About This Manual 13 Regional Coding System Connection 14 Installation and Connections 14 Audio Connections 14 Video Connections 15 Optional Audio Connections 15 Speaker Placement 16 Connecting AC Power 16 First Turn On 16 Basic Playback 16 Disc Playback Features 16 Skipping tracks or titles/chapters 16 Fast Motion Playback/Fast Search 16 Freeze Frame and Frame Advance (with DVD only) Radio Menu 23 Rearranging the station list 23 Selecting presets 23 Removing presets 23 Auto Preset function 24 RDS Station ID 24 Surround Mode for Tuner TV Menu, AUX Menu, Digital In Menu 24 TV Menu 24 AUX Menu 24 Digital Menu 25 Surround Mode Chart USB Menu 25 USB Menu Remote Control 26 Learning Codes from a Remote 26 Erasing Learned Codes 26 Macro Programming DVD Languages Codes 27 Languages Codes Troubleshooting 28 Troubleshooting Glossary 30 Glossary Specifications 31 Specifications Declaration of Conformity 17 Slow Motion Playback (with DVD only) 17 About DivX Movie Files 17 Surround Mode System Setup 18 System Defaults 18 Setup Menu 18 System Settings 18 Display Language 18 Preferred Subtitle Language 18 Panel Time-Out 18 Status Bar Time-Out 18 Parental Control 19 Disc Recognition 19 PBC Support 19 Screen Saver 19 Show Angle Icon 19 Audio Settings 19 Preferred Audio Language 19 Dynamic Range 19 Tone Control 19 Bass Level 19 Treble Level 19 DVD Sound Mode 19 Audio Adjustment 19 Output Level Adjustment 20 Video Settings 20 Aspect Ratio 20 TV Standard 20 Scan Type 20 Video Output 20 Scart Output 20 Video Mode 20 Video Resolution 20 Video Adjustment Test Screen 21 Test Screen 21 TV Picture Adjustment with Test Screen Player Menu 22 Using the Status Bar Menu 22 Player Menu 22 Information Displays 22 Programmed Play We, Harman Consumer Group, Inc. 2, route de Tours 72500 Château-du-Loir, FRANCE declare in own responsibility, that the product described in this owner's manual is in compliance with technical standards: EN 55013:2001 + A1:2003 EN 55020:2002 + A1:2003 EN 61000-3-2:2000 EN 61000-3-3:1995 + A1:2001 EN 60065:2002 Jurjen Amsterdam Harman Consumer Group, Inc. 01/07 Typographical Conventions In order to help you use this manual with the remote control, front-panel controls and rear-panel connections, certain conventions have been used. EXAMPLE ­ (bold type) indicates a specific remote control or front-panel button, or rear-panel connection jack EXAMPLE ­ (OCR type) indicates a message that is visible on the front-panel information display 0 ­ (number in a square) indicates a specific front-panel control 0 ­ (number in a circle) indicates a rear-panel connection 0 ­ (number in an oval) indicates a button or indicator on the remote A ­ (letter in a square) indicates an indicator on the front panel display The appearance of the text or cursor for your receiver's on-screen menus may vary slightly from the illustrations in this manual. [. . . ] · MEDIUM applies a moderate amount of compression so that louder passages are a little bit quieter. · MAXIMUM applies more compression so that louder passages are much softer. Feel free to experiment with the settings at any time. Tone Control: Activates or De-activates the Bass and Treble settings. Once either the Bass or Treble Settings are changed, the Tone Control automatically switches to ON. Bass Level: Sets the level of low frequencies. Treble Level: Sets the level of high frequencies. DVD Sound Mode: Sets the audio format of the DVD-disc playing (for other sources, see Surround Mode in each respective chapter). Once set to stereo, every surround format on a DVD will be converted to a pure stereo signal. Once set to any of the Dolby Virtual Speaker modes, all stereo signals on a DVD are forced any of the Dolby Virtual Speaker modes into virtual surround for surround playback with only two loudspeakers. The Audio Adjustment Submenu contains the access to the output level adjustment settings of the HS 200. Follow the explanations in the Upper Menu Line on the bottom of your screen to make adjustments. Output level adjustment Output level adjustment is a key part of the configuration process for any surround sound product. The default settings of the DVD player is 0 dB for all channels. In case you feel adjustments are necessary in your setup, we advise you to make the adjustments using the internal test tone generator. Once the cursor is moved to any of the speaker level icons, the test noise will be heard from the corresponding speaker. If this is not the case please check whether the loudspeaker is connected to the correct loudspeaker output on the rear panel. The speaker level can be adjusted by pressing ENTER and selecting an appropriate level indicated in the Lower Menu Line. The test noise will stop as soon as the cursor is moved away from any speaker level icon. Audio Adjustment Audio Settings The Audio Setting Submenu contains the following settings. Follow the explanations in the Upper Menu Line on the bottom of your screen to change the settings. Preferred Audio Language: Defines your preferred audio language. Every time a disc is played that contains this audio language, it will be activated automatically. [. . . ] The picture data is compressed to about 1/40 of its original size. The DVD also uses the variable rate coding technology that changes the data to be allocated according to the status of the picture. The audio data is recorded in Dolby Digital, DTS and/or PCM, allowing you to enjoy more natural audio presence. Furthermore, various advanced functions such as multi-angle, multilingual, and subtitles may be provided with the DVD. [. . . ]