User manual HARMAN KARDON MAS 100

[. . . ] MAS 100/ MAS 110 MUSIC SYSTEM OWNER'S MANUAL SAFETY INFORMATION Important Safety Instructions 1. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] These buttons work the same way in all menus. · Set the format: Press the 7/3 Buttons until "Set 12/24 hour" appears. Press the Enter Button to change the format, and use the 7/3 Buttons to select between the 12- and 24-hour time displays. Press the Enter Button to save the change. 5. Set the day of the week: Press the 7/3 Buttons until "Set Day" appears. Press the Enter Button to display the day of the week, and use the 7/3 Buttons to select the desired day. Press the Enter Button to save the changes. Setting the Alarms For automatic turn-on at a programmed time, set one or both of the alarms. The alarms may be set using the Settings Menu. Press the Settings Button on the remote. Press the 7/3 Buttons until "Alarm Setup" appears in the Message Display. Setting the Clock The clock may be set using the Settings Menu. Press the Settings Button on the remote. Figure 2: Setting the Clock Settings Speaker Setup Right Settings Time Setup > Left < > Enter Back Time Setup Clock Enter Clock Off Right > Left Enter or Back Time Setup Set Clock Right > Left < Time Setup Set Day Enter or Back Set Day Monday Enter Enter Back > > Set Clock Set Time Enter Right > Left < Set Clock Set 12/24 hour > Enter or Back Enter Enter or Back Set Time 12 : 43 > Set 12/24 hour 12 hour > 12 OPERATION 3. Press the Enter Button to display "Alarm 1". Use the 7/3 Buttons Source: Select the source that will play when Alarm 1 or Alarm 2 sounds. The weekday and weekend alarms for each of Alarm 1 and Alarm 2 must use the same source. If you prefer different sources for weekdays and weekends, use Alarm 1 for weekdays only and Alarm 2 for weekends only by adjusting the Weekday On/Off and Weekend On/Off settings appropriately. Use the 7/3 Buttons to select one of these sources: Disc, USB A to display "Alarm 2". When the desired alarm is displayed, press the Enter Button to set it. The "Weekday: On" message will appear. Use the 7/3 Buttons to display the Weekday Time, Weekend On/ Off, Weekend Time or Source Settings, and press the Enter Button to make a change. You may adjust the Weekday, Weekend and Source settings for either alarm. Weekday On/Off: Select to adjust whether Alarm 1 or Alarm 2 will sound on weekdays. Use the 7/3 Buttons to turn the setting On or Off. Press the Enter Button to save the change. Weekday Time: Select to set the Alarm 1 or Alarm 2 time for weekdays. The numeric time display will appear, with the hour setting flashing. Use the Numeric Keys to enter the two-digit hour setting, and the minute setting will flash. [. . . ] However, you may record a coaxial or optical digital audio source using either type of digital audio output. Analog inputs (TV, AUX, PHONO, LINE IN) 2. The Bridge Are not available through the MAS System's Coaxial Digital Output. Please make certain that you are aware of any copyright restrictions on any material you record. [. . . ]