User manual HARMAN KARDON RCP 6

[. . . ] RCP 6 SYSTEM REMOTE OWNER'S MANUAL (FOR USE WITH CP 60 SYSTEM) TABLE OF CONTENTS 3 4 8 9 11 11 11 11 12 13 15 15 16 17 17 18 18 18 19 INTRODUCTION AND FEATURES REMOTE CONTROL FUNCTIONS BATTERIES PROGRAMMING SOURCES ADVANCED FUNCTIONS Punch-Through Programming Macros Resetting the Remote APPENDIX Remote Control Function List Remote Control Product Codes TV VCR CD DVD SAT TAPE CBL THE BRIDGE/DMP 2 INTRODUCTION AND FEATURES Please register your product on our Web site at www. harmankardon. com. Note: You'll need the product's serial number. At the same time, you can choose to be notified about our new products and/or special promotions. WWW. HARMANKARDON. COM Thank you for choosing Harman Kardon®! Your CP Series system combines the superior performance and practical flexibility of high-quality separate audio/video components with the convenience of a complete system in one carton. You will need to provide a video display or television, but you may also add almost any source device, ranging from a cassette deck or VCR all the way up to the latest high-definition digital cable or satellite television set-top box (or even products that may be released in the future). The single RCP 6 remote replaces the original remotes supplied with the AVR 247 receiver and DVD 38 DVD player. [. . . ] Press it to select a subtitle language or to turn subtitles off. NOTE: Due to the variations in how DVD discs are authored, the subtitle languages displayed by the DVD 38 may not accurately reflect the actual languages available on the disc. It is recommended that subtitles be selected using the disc's menu. Dim: Press this button to partially or fully dim the AVR 247's or DVD 38's front-panel display. Transport Controls: These buttons have no effect on the receiver but are used to control the DVD 38 and many other source components. By default, when the remote is operating the receiver, these buttons will control the DVD 38. Record: This button has no function on the AVR 247 or DVD 38. It is used with many audio and video recorders. Stereo Modes/Repeat: The first press of this button will select the last-used Stereo mode, which may be Surround Off or Two-Channel Processing. Each additional press will toggle between Surround Off, 5-Channel Stereo and 7-Channel Stereo. When an analog audio source is in use and the AVR 247's Tone Mode control has been set to Out, you may also select Analog Bypass mode, which passes the analog input signal to the volume control, bypassing digital signal processing. See the AVR 247 manual for more information. BATTERIES The RCP 6 remote control uses three AAA batteries, which are included. To remove the battery cover located on the back of the remote, firmly press the ridged depression and slide the cover toward the top of the remote. Insert the batteries as shown in Figure 1, making sure to observe the correct polarity. When using the remote, remember to point the lens toward the front panel of the AVR 247 or DVD 38. Make sure no objects, such as furniture, are blocking the remote's path. Bright lights, fluorescent lights and plasma video displays may interfere with the remote's functioning. The remote has a range of about 20 feet, depending on the lighting conditions. It may be used at an angle of up to 30 degrees to either side of the component. If the remote seems to operate intermittently, or if pressing a button on the remote does not cause the AVR Selector or one of the Input Selectors to light up, then make sure the batteries have been inserted correctly, or replace all three batteries with fresh ones. Figure 1 ­ Remote Battery Compartment 8 PROGRAMMING SOURCES Programming Sources The RCP 6 remote is capable of controlling not only the receiver and DVD player included in your CP system, but it may also be programmed to control many brands and models of VCRs, CD players, cable boxes, satellite receivers, cassette decks and TVs, as well as an iPod (not included) docked in Harman Kardon's optional The Bridge. It may help to think of the remote as a book with pages. Each page represents the button functions for a different device. To access the functions for a particular device, you first need to turn to that page, that is, switch the remote to that device mode. This is done by pressing the AVR Button to access the codes that control the receiver, or the Input Selectors to access the codes for the devices programmed into the remote. You may have noticed that three of the Input Selectors look different from the others (see Figure 2). For the DVD/CD, TAPE/The Bridge and HDMI 1/HDMI 2 Selectors, there is a primary source, whose name is printed on the button, and a secondary source, whose name is printed above the button. [. . . ] Button Name AVR Function 1 Power On 2 Power Off 3 Mute 4 AVR 5 DVD/CD 6 Tape/ The DVD Power On Power Off Mute (AVR) AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select CBL/SAT Select TV Select XM Select Tuner Select Audio V. OFF CD/CD-R Power On Power Off Mute (AVR) AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select CBL/SAT Select TV Select TV Select XM Select Tuner Select Tape VCR (VID1) TiVo (VID1) Power On/Off TV Power Mute AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select CBL/SAT Select TV Select TV Select XM Select Tuner Select Channel + TV Input Channel ­ Live TV CBL (VID2) Power On Power Off Mute AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select CBL Select TV Select TV Select XM Select Tuner Select Channel + TV/CBL Channel ­ OSD SAT (VID2) Power On Power Off Mute AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select SAT Select TV Select TV Select XM Select Tuner Select Channel + TV/SAT Channel ­ OSD TV (VID3/VID4) Power On Power Off Mute AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select CBL/SAT Select TV Select TV Select XM Select Tuner Select Channel + TV/VCR Volume Up The Bridge TM (DMP) XM HDMI 1/2 Power On Power Off Mute AVR Select DVD Input Select CD Input Select Power On (AVR) Power On Power Off (AVR) Power Off Mute (AVR) AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select CBL/SAT Select TV Select TV Select XM Select Tuner Select Mute AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select CBL/SAT Select TV Select TV Select XM Select Tuner Select Channel + Power On (AVR) Power On (AVR) Power On Power Off (AVR) Power Off (AVR) Power Off Mute (AVR) AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select CBL/SAT Select TV Select TV Select XM Select Tuner Select Mute (AVR) Mute AVR Select DVD Select CD Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select TV Select TV Select XM Select Tuner Select AVR Select DVD Input Select CD Input Select Tape Select HDMI 1 Select HDMI 2 Select VCR Select TV Select TV Select XM Select Tuner Select Channel + TV/Video Volume Up Volume Up Channel ­ OSD Volume Down Menu Up Scroll ­ Select Scroll + Left Set Right Down Volume Down Guide Menu Up Left Set/Enter Right Down Prev. Channel 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Bridge TM Tape Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select The Bridge (DMP) Select 7 HDMI 1/HDMI 2 HDMI 1 Select HDMI 2 Select 8 VID 1 (VCR) 10 VID 3 (TV) 11 VID 4 12 XM 13 AM/FM 14 6/8CH 16 Test Tone 17 T/V/V. Off 18 Vol Up 19 Surr/Title Volume Up Video 1 Select 9 VID 2 (CBL/SAT) Video 2 Select Video 4 Select XM Select Tuner Select CBL/SAT Select CBL/SAT Select Video 3 Select TV Select 6/8 Ch. Input Select Test Tone Input Select Volume Up CDR Select Program Channel ­ OSD TV/VCR Volume Up Disc Info HD Mode Volume Down Guide Menu Up Left Enter Right Down Open/Close 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Menu Up Left Select Right Down Return/Exit Prev Channel 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Prev Channel 1 2 3 4 5 6 7 8 Prev Channel 1 2 3 4 5 6 7 8 Guide Menu Up Left Enter Right Down Info Menu Up Left Enter Right Down Menu Up Left Enter Right Down Disc Menu Setup Continuous Play Intro Scan 15 Sleep/Audio Sleep DSP Surround Mode Select Title Channel ­ OSD 20 OSD/Info OSD 21 M-Room/HD Multiroom 22 Vol Down 23 CH. /Disc Menu Channel Trim 24 Speaker/Setup Speaker Setup 25 / Volume Down Volume Down Volume Down Move/Adjust Up Up Move/Adjust Left Left Set Enter Move/Adjust Right Right Move/Adjust Down Down Status 1 2 3 4 5 6 7 8 26 fi 27 Set 28 fl 29 ¤ 30 Digital/Open/Close Digital Input Select Open/Close 31 Delay/Status Delay Adjust 32 1 33 2 34 3 35 4 36 5 37 6 38 7 39 8 1 2 3 4 5 6 7 8 13 13 APPENDIX Table A1 ­ (continued) No. [. . . ]