User manual HARMAN KARDON T10

[. . . ] A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] For the other Source Selectors, proceed to step 6. · Cable/SAT: Use the KL Buttons to select either a cable television or satellite television set-top box, and press the OK Button. · AUX: Use the KL Buttons to select a CD player, HDTV set-top box, PVD (personal video device, such as a DVR), TiVo system or VCR. Press the OK Button when the desired device appears. · A, B, C, D: Select any desired device type. Select whether to program the device manually or use the remote's Auto Search capability. Manual programming simply requires you to select the brand name of your device and try a handful of possible codes. There is no need to look up numeric codes; the T10/AVR 660 does the work for you. It is recommended that you select Manual programming first. · Manual Programming: Use the KL Buttons to scroll through the list of brands for which the remote has codes stored in its library. When your brand appears on the lower line, press the OK Button. See Figure 19. Figure 19 ­ AVR and Device Remotes "Head to Head" to change the device type of a Source Selector: If your system includes two products of one device type but no product corresponding to a different Source Selector, you may program one product into its corresponding Source Selector, and change another Source Selector's device type to program the second product by following this procedure: 1. Access the remote's menu system by pressing and holding the AVR Settings Button for 3 seconds, until the "Main Menu" and "Program Device" messages appear in the LCD Display. Use the KL Buttons to select "Change Device Type" from the remote's main menu, and press the OK Button. Use the KL Buttons to select the Source Selector whose device type you wish to change, and press the OK Button. Your selection will appear on the left side of the lower line, while the choice of new device types will appear on the right side. Use the KL Buttons to select the new device type you wish to assign to the Source Selector, and press the OK Button. Program your product into the Source Selector by choosing the brand, then searching for a compatible code set, as described in the preceding section. If you allow the remote to "time out", then the device type reassignment will not take effect. 2. Access the remote's menu system by pressing and holding the AVR Settings Button for 3 seconds, until the "Main Menu" and "Program Device" messages appear in the LCD Display. Use the KL Buttons to select "Learn" from the remote's main menu, and press the OK Button. When the "Learn Menu" message appears in the upper line of the LCD Display, make sure the "Learn" message appears in the lower line (not "Learn Delete"), and press the OK Button. [. . . ] At the same time, you can choose to be notified about new products and/or special promotions. 40 TECHNICAL SPECIFICATIONS Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. EzSet/EQ, Designed to Entertain and The Bridge II logo are trademarks of Harman International Industries, Incorporated. Apple, iPod, iTunes and Macintosh are trademarks of Apple Inc. , registered in the U. S. [. . . ]