User manual HARMAN KARDON TU 980

[. . . ] TU 980 OWNER'S MANUAL ENGLISH Table of Contents 3 Introduction 4 Front Panel Controls 5 Rear Panel Connections 6 Remote Control Functions 7 Installation and Connections 8 Operation 8 8 9 9 9 9 10 11 Basic Operation Station List Preset Setting Function Control Station Order Signal Error Rate Preset Tune RDS Operation Declaration of Conformity We, Harman Consumer Group, Inc. 2, Route de Tours 72500 Château-du-Loir, FRANCE declare in own responsibility, that the product described in this owner's manual is in compliance with technical standards: EN55013(2001) & + A2(2006) EN55020(2002) & + A2(2005) EN60065:2002 EN61000-3-2(2000)+A2(2005) EN61000-3-3 (1995)+A1(2001)+A2(2005) EN61000-4-2(1995) & + A1(1998) & + A2(2001) EN61000-4-3(2002) & + A1(2002) EN61000-4-4(2004) 12 Troubleshooting Guide 13 Technical Specifications Jurjen Amsterdam Harman Consumer Group, inc. 12/07 Typographical Conventions In order to help you use this manual with the remote control, front-panel controls and rear-panel connections, certain conventions have been used. EXAMPLE ­ (bold type) indicates a specific remote control or front-panel button, or rear-panel connection jack EXAMPLE ­ (OCR type) indicates a message that is visible on the front-panel information display 0 ­ (number in a square) indicates a specific front-panel control 0 ­ (number in a circle) indicates a rear-panel connection 0 ­ (number in an oval) indicates a button or indicator on the remote 2 TABLE OF CONTENTS Introduction Congratulations! [. . . ] Once the unit is in standby, you may begin a listening session by pressing the System Power Control 1 on the front panel or the Power On button 0 on the remote control. Note that the Power Indicator 0 will turn blue. To turn the unit off at the end of a listening session simply press the System Power Control 1 on the front panel or the Power Off A on the remote. This places the unit in the Standby mode, and the Power Indicator 0 will turn amber to remind you that the unit is ready for operation when a power command is received from the remote. When you will be away from home for an extended period of time it is always a good idea to completely turn the unit off by unplugging it from the AC wall outlet. Note that the backup system in the TU 980 will retain information such as programmed presets for 14 days. · To dim the brightness of the front panel display, press the Dimmer button 7 on the front panel. The first press will dim the lights to half normal. A second press will turn the display to normal brightness again. The arrows show the progress of the sequence. On the right top side, you will see how many digital stations have been found. It can occur that one of the stations in your list is temporarily not available. A "?" symbol will be visible in front of the station name to indicate such a station. If you select the station, the Information Display 6 will show STATION NOT AVAILABLE, and will go back to the current radio station. If no digital stations can be found, the display will show NO STATIONS AVAILABLE. You can now select MANUAL TUNE by pressing the Select Button A8 or turn the Control Ring 9 to select AUTOTUNE to try to manually find available stations. If no stations can be found, please check that the antenna is connected correctly and if your area is covered by DAB. 8 OPERATION Operation Preset Setting Besides having the TU 980 create a station list, you can also store presents into the tuners memory. Tune to the desired station with the Control Ring 9. Press the Memory Button on the front panel 8 or on the remote control 9. You will see the 01 segments in the Information Display 6 will start to blink. Software Version: will show the actual software version of the product. To change between the options, press the Info Button on the front panel 4 or on the remote control 3. Note that the upper display line will always show the actual station. Pressing the Info Button again will show the next option. When you have found the information you would like to display, press the Select Button A8 to activate the change. Station Order In this section you can select the way the station list is displayed. [. . . ] When a station is tuned, the search will stop and the display will show the station's "Call Letters" or other "Program Service" information. To turn off the PTY Search at any time, press the RDS Button again. NOTE: Many stations do not transmit a specific PTY. The display will stay blank when such a station is selected and PTY is active. Processor Reset In the rare case where the unit's operation or the displays seem abnormal, the cause may involve the erratic operation of the system's memory or microprocessor. [. . . ]