User manual HARMAN KARDON TU909

[. . . ] A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] Set the clock: Press the 7/3 Buttons until "Set Clock" appears on the lower line. Press the Enter Button to display "Set Time". · Set the time: Press the Enter Button and use the Numeric Keys to enter the hour, then the minute. If the 12-hour time format is active, use the 7/3 Buttons to select "AM" or "PM". Press the Enter Button to advance from one field to the next without changing it, and press the Enter Button to save the settings. Turning On the TU909/MAS 110 To turn on the TU909/MAS 110, press and hold the Power Button on the remote or the controller for 1 second. The system will also turn on when one of the Source Selectors or the Eject Button on the remote is pressed. Press the Power Button to turn off the system. If the clock has been turned off, the Message Display will go dark to conserve power. Otherwise, the time will be displayed at half-brightness. NOTE: To open a menu or to save new settings press the Enter button. To advance to the next entry field without changing the value, press the Enter Button. To return to the previous menu level without making any changes, press the Back Button. These buttons work the same way in all menus. · Set the format: Press the 7/3 Buttons until "Set 12/24 hour" appears. Press the Enter Button to advance from one field to the next without changing it, and press the Enter Button to save the change. (front) or B (rear), Radio FM, Radio DAB (available only on MAS 110) or DMP (iPod docked in The Bridge II when available). If Disc, DMP or USB A or B is selected, make sure a CD, iPod or USB is present and contains audio materials. If no device is present, the system will switch to FM Radio. Press the Enter Button to save the change. 4. You may adjust the duration of playback and the snooze control, as well as the volume level. These settings are global to both Alarm 1 and Alarm 2, and for both the weekday and weekend alarms. Weekend On/Off: Select to adjust whether Alarm 1 or Alarm 2 will sound on weekends. Use the 7/3 Buttons to turn the setting On or Off. Press the Enter Button to save the change. Alarm Timeout: With "Alarm 1" in the Message Display, press the 7/3 Buttons until "Timeout" appears. This setting determines how long the system will play once the alarm sounds. To change the Timeout setting, press the Enter Button. Use the 7/3 Weekend Time: Select to set the Alarm 1 or Alarm 2 time for weekends. The numeric time display will appear, with the hour setting flashing. [. . . ] If you have connected a compatible device, such as a portable audio player or a cassette deck, select the corresponding auxiliary input as the source and use the device's own controls. To select one of the analog audio inputs or the phono input, press the Line In Button repeatedly to toggle through the inputs. To select one of the coaxial or optical digital audio inputs, press the Digital In Button repeatedly. TV Input (Analog): Dual rear-panel RCA-type jacks AUX Input (Analog): Dual rear-panel RCA-type jacks Phono Input (Analog): Dual rear-panel RCA-type jacks Line Input (Analog): Front 3. 5mm jack Coaxial 1 Input (Digital): Rear-panel RCA-type jack Coaxial 2 Input (Digital): Rear-panel RCA-type jack Optical 1 Input (Digital): Rear-panel TOSlink® connector Optical 2 Input (Digital): Rear-panel TOSlink connector NOTES: NOTE: 1. Analog audio signals are not converted to digital form, and digital audio signals are not converted to analog audio form. [. . . ]