User manual HARMAN KARDON TU9200

[. . . ] With the purchase of the Harman Kardon TU9200 you are about to begin many years of listening enjoyment. While sophisticated systems are hard at work within the TU9200 to make all of this happen, hookup and operation are simple. To obtain maximum enjoyment from your new tuner, we urge you to take a few minutes to read through this manual. This will ensure that connections are made properly. [. . . ] The FM antenna may be an external roof antenna, an inside powered or wire lead antenna or a connection from a cable system. Note that if the antenna or connection uses 300-ohm twin-lead cable, you need to use a 300-ohm-to-75-ohm adapter to make the connection. The supplied antenna is for indoor use only. Connect a DAB Antenna to the DAB Antenna 4 connection. The supplied antenna is for internal use only. Fix it to the wall in a vertical direction. The strength of the incoming signal can be shown on the Information Display by pressing the Select button A8. The more segments are visible in the lower display line, the stronger the signal. By changing the position of the antenna, you can increase the signal strength. NOTE: The station list can be shown in different order. For more info, see page 9. · When using the TU9200 for the first time, it will be placed in a standby mode, as indicated by the amber color of the Power Indicator 0. The options are Alphanumeric and Ensemble Station. Function Control The DAB mode in the TU9200 contains a menu structure to access various system options. To enter the menu, press the Function Button on the front panel 3 or on the remote control 6 once. To scroll through the list of sections of the menu, turn the Control Ring 9 or press the Scroll Buttons on the remote control 5. The sections will be shown on the lower display line in the Information Display. To enter a section and see the options, press the Select Button Select button A8. You can scroll through the options with the Control Ring and activate an option by pressing the Select Button once that option is shown on the Information Display. 3. Turn the Control Ring, until the desired station preset is shown in the Information Display. The desired preset can also be entered with the Numeric Keys on the remote control 1. Within 4 seconds, press the Memory Button again to store the station in the memory. Information settings The DAB signal contains besides the radio station additional information. This information can be made visible in the lower display line of the Information Display 6. [. . . ] Press and hold the RDS Button 43 until the Information Display will show RDS PROGRAM TYPE. 2. Turn the Control Ring on the front panel to scroll through the list of program types. Once you have found the program type you would like to listen to, press the Select Button A. Turn to Control Ring again to start the PTY Search. [. . . ]