User manual HARMAN KARDON TU930

[. . . ] If the AVR doesn't detect the iPod or iPhone, turn off the AVR, remove the iPod or iPhone from The Bridge III and reset the iPod or iPhone. When the iPod or iPhone returns to its main menu, redock it and turn on the AVR. Table 4 summarizes the controls available with The Bridge III during normal playback. While a selection is playing, the song title and playmode icon will appear in the front-panel Message Display. [. . . ] A graphic bar indicates the current play position within the track. If random or repeat play has been programmed, an icon will appear in the upper right corner. The screen may disappear from view, depending on the display settings on the AVR. Restore the Now Playing screen to view by pressing either of the M / N Buttons. nOtE: It is strongly recommended that you use the screen saver built into your video display to avoid possible damage from "burn-in" that may occur with plasma and many CRT displays when a still image, such as a menu screen, remains on display for an extended period of time. Press the Menu Button to view the slide-out menu: Music: Navigates the audio materials stored on the iPod or iPhone. Use the Page Up/Down Control on the remote to scroll through the content a page at a time. Photo/Manual: Select this line to view still images stored on a photo-capable iPod or iPhone. The system will switch to iPod Manual Mode, and control will shift to the iPod. Use the screen and controls on the iPod. To view photos on a video monitor connected to the AVR, select the photo and press the Play Button on the iPod, or press the OK Button on the remote three times. Use the Page Up/Down control on the remote to scroll a page at a time (not in manual mode). nOtEs: · The Play and Pause functions are not available unless content has been selected for playback. · To search within a track (not in Manual Mode), press and hold the indicated button. Press the Previous Track Button once to skip to the beginning of the current track. Press the Previous Track Button twice to skip to the beginning of the previous track. iPod ManUal MODE Press the Menu Button and select Photo/Manual to enter iPod Manual Mode. This is required to view photos stored on the iPod. Table 5 summarizes the controls available with The Bridge III in iPod in Manual mode. 5 English OPERATIOn table 5 ­ Using the Bridge III in iPod Manual Mode iPod or iPhone Function Play Pause Menu Select Remote Control Key Play ( N) Pause (1) Back/Exit or Left Arrow (M ) OK Charging the iPod or iPhone You may leave your iPod or iPhone in The Bridge III even when you are not using it as a playback source. Whenever the iPod or iPhone is docked and your receiver is turned on, The Bridge III will charge the battery in the iPod or iPhone. Undocking the iPod or iPhone We recommend that you pause playback before physically removing the iPod or iPhone from The Bridge III. Select Next Screen* Right Arrow (N) (Scrubber, Cover Art, Ratings) Scroll Reverse Scroll Forward Next Track Previos Track Page Up or Up Arrow (K) Page Down or Down Arrow (L) Next (J) or Right Arrow ( N) Previous (I) or Left Arrow (M ) * Does not appear on video display connected to AVR. When a slideshow is being displayed, some controls have different effects: · To pause the slideshow, including any audio track that is playing, press the Pause Button. · To resume a paused slideshow, press the Pause Button. Pressing the Play Button begins audio playback. · To play an audio track stored on the iPod, adjust the Slideshow Settings on the iPod. [. . . ] · To skip to the next or previous photo on the iPod, press the Next or Previous Transport Control. · It is not possible to skip to the next or previous audio track during a slideshow. · To search forward or in reverse within an audio track, press the Forward or Reverse Search Transport Control. If no audio track is playing, these controls will have no effect during the slideshow. 6 TROUBLESHOOTInG sYMPtOM The iPod or iPhone does not play or respond to commands from the receiver's remote. [. . . ]