User manual HARMAN KARDON TU9400

[. . . ] See Figure 3. OPERATIOn UsIng Once The Bridge II is connected, use either the frontpanel controls or The Bridge-ready product's remote control to select tracks for playback. Press the DMP/ The Bridge Button on the remote, or use the Source Selector on the front panel to change sources. When an iPod is docked, a message will appear in the front-panel and on-screen displays, indicating that The Bridge II is connected. The displays will switch to the navigation menus, and the menu screen on the iPod itself will be replaced by a Harman Kardon logo graphic and a message reading "OK to Disconnect. [. . . ] " When you see the "OK to Disconnect" message displayed, the iPod is in Extended Mode and may be operated using the Harman Kardon product's front-panel or remote controls. The controls for most The Bridge- and The Bridge II-ready products are described in Table 2. The blank boxes indicate that the function is not available using those controls. Because the specifics of operation vary by product, please review the owner's manual for detailed information. While a selection is playing, the song title, artist and album name (if available) will scroll across the upper line in the front-panel Message Display. The lower line will display the elapsed time of the track on the left, the play mode icon, and the time remaining on the right. If a video display is connected to the Harman Kardon product, the available track information will appear there as well, along with the time and play mode displays. Some Harman Kardon The Bridge- and The Bridge II-ready products include a settings menu that allows you to select Repeat or Random playback or Resume mode. Refer to the product's manual for more information. Playback of photos, when available, is different from audio playback. · In Manual Mode, the menus for the iPod will only be visible on its screen. You may operate the iPod using the receiver's remote, as long as it is in The Bridge device mode. 0057CSK - HK Bridge II All v10. indd 4 10/02/09 10:32:20 OPERATIOn Charging the iPod You may leave your iPod in The Bridge II even when you are not using it as a playback source. Whenever the iPod is docked and your receiver is turned on, The Bridge II will charge the battery in the iPod. Some Harman Kardon receivers allow you to charge the battery in the iPod when the receiver is turned off (i. e. , in the "Standby" mode). Consult your receiver's owner's manual for more information. Undocking the iPod English We recommend that you pause playback before physically removing the iPod from The Bridge II. IMPORtant nOtE: When using The Bridge II with the DMC 1000, do not remove the iPod from The Bridge II without first selecting the "Undock iPod" option in the on-screen menu. table 2 ­ Controlling the iPod -Ready Products Function on iPod Play Pause Menu Select Scroll Reverse Scroll Forward Forward Search/Next Track Remote Control Key Play (>) Pause (II) Menu (Spkr) Set Left Arrow (< ) Right Arrow ( >) Forward/Next (>>I) Front-Panel Button Tuner Mode Tuner Mode Set Preset Down Preset Up Tuning Up Play (>) Pause (II) OK Left Arrow (< ) Right Arrow ( >) Forward/Next ( >>I) Reverse/Previous (I << ) Channel/Page Up/Down -Ready Products Remote Control Key Tuner Band (AM/FM) Menu Reverse Reverse/Previous (I<< ) Tuning Down Search/Previous Track Page Up/Down 5 0057CSK - HK Bridge II All v10. indd 5 10/02/09 10:32:25 TROUBLESHOOTInG tROUBlEsHOOtIng gUIDE sYMPtOM The iPod does not play or respond to commands from the receiver's remote. sOlUtIOn · Make sure that The Bridge II is properly connected to a compatible Harman Kardon receiver. · Make sure that DMP or The Bridge is selected as the input on the receiver. The LED under The Bridge II goes out when the receiver is in the Standby mode. · Check the menu setting on your receiver to make sure that the option to charge iPod while in Standby mode is turned on, if available. [. . . ] · Check the menu setting on your receiver to make sure that the option to charge iPod while in Standby mode is turned on, if available. · Make certain that the receiver is in the Standby mode by looking for the amber standby light. The iPod will not charge when the Master Power Switch is off. The display and controls on the iPod do not operate in iPod mode. [. . . ]